Micro-Epsilon: The performance of the scanCONTROL 3000 scanners has been increased: improved algorithms and components accelerate data acquisition and output to up to 10 million measuring points per second. The profile calculation and evaluation...
Micro-Epsilon: If the installation requires measurements at a large distance, long-range laser sensors from Micro-Epsilon are used. The new optoNCDT 1760-1000 measures accurately even at distances up to 2 m and, at the same time, quickly at up to...
Micro-Epsilon: The new optoNCDT ILR1171-125 laser distance sensor is used for distance measurements up to 270 m and particularly impresses in outdoor measurements. Thanks to the time-of-flight principle and a high measuring rate of up to 40 kHz,...
Micro-Epsilon: All scanCONTROL laser scanners from Micro-Epsilon are now compatible with Cognex VisionPro via the AIK adapter. This provides more flexibility and easier connectivity options. The AIK adapter combines the advantages of the Cognex...
Eddylab: The new eddylab laser sensors of the AXIS series feature a particularly small design and ensure precise measurement results even on difficult surfaces and in the tightest spaces. The smallest sensor in the AXIS-MI-10/104 laser sensor...
Micro-Epsilon: Equipped with the integrated EtherCAT, EtherNet/IP and PROFINET interfaces, the optoNCDT 1900 laser triangulation sensors are now smarter, faster and easier to operate. They combine a high measuring rate with compact size,...
Micro-Epsilon: A powerful computer unit is now available for Micro-Epsilon's 3D sensor portfolio in the form of the Industrial Performance Unit (IPU). The system consists of a powerful industrial controller and the 3DInspect evaluation software...
Micro-Epsilon: The dimensional accuracy of sheet metal can be checked using a Dimensionics measuring table equipped with precise laser profile sensors from Micro-Epsilon. In an automated process, the sensors check the width, length, angle,...
Micro-Epsilon: The scanCONTROL 3000 laser scanners are now even more versatile. As a rear-tail version, they have a rear cable outlet including integrated cable. This reduces the space required to install the scanner by half. In addition, a new...
Waycon: The correct position of seals in design components is crucial for a perfect fit. Seals often differ in material, colour and surface characteristics. This is a considerable challenge for sensors that measure distance. Added to this are...
Micro-Epsilon: For the 3D measurement of suspension springs, Qsigma GmbH has developed the precise Spring Measurement System. With this system, springs with different properties can be tested in a very short time. For this purpose, scanCONTROL...
Waycon: Laser sensors (also optoelectronic sensors) are used in many fields of industry and research, to measure distances reliably and quickly. In doing so, triangulation, runtime measurement or phase shift methods are normally used for the...
Micro-Epsilon: This innovative optoNCDT 1900 laser sensor is used for dynamic displacement, distance and position measurements and impresses with its high speed, compact design and accuracy. The latest sensor generation is now even smarter -...
Micro-Epsilon: If large distances have to be measured, whether indoors or outdoors, optoNCDT ILR2250-100-H laser distance sensors from Micro-Epsilon are used. The sensors are available with heating and cooling element and provide precise, stable...
Micro-Epsilon: Demanding automation tasks such as automotive production, 3D printing and robotics applications can be solved with the highest precision using optoNCDT 1900 laser sensors. The latest models provide information on displacement,...
Micro-Epsilon: Foam cutting machines must ensure a constant cutting quality, which requires among other things a perfect condition of the cutting blades. Laser profile scanners from Micro-Epsilon are used to test the knife sharpness. Foam cutting...
Micro-Epsilon: Automated crane systems must be controlled reliably and extremely precisely. This is the only way to achieve a fast, safe and efficient material flow. Modern control units frequently use measurement values obtained from...
RIFTEK: Turn-key solution on the base of 2D laser scanners and point triangulation sensors for continuous contactless measurement of gypsum boards geometrical parameters. Measured parameters: Full profile of any type shape edge with two adjacent surfaces...
RIFTEK: Our new finished project continues RIFTEK’s work in solving different measurement challenges and is intended for non-contact measurement of gypsum boards during their production. 3DGipsumB system contains 3 measurement stations, sequentially...
RIFTEK: Our new finished project continues RIFTEK’s work in solving different measurement challenges and is intended for non-contact measurement of gypsum boards during their production. 3DGipsumB system contains 3 measurement stations, sequentially...
Micro-Epsilon: The optoNCDT ILR2250 laser distance sensors from Micro-Epsilon can now also be integrated in automation systems via IO-Link. The advantages are easy handling and high flexibility. The sensors ensure gapless communication from the...
RIFTEK: Our development team constantly communicates directly with customers and partners. This feedback is very important to us and we try to satisfy and anticipate customer’s requirements for our devices as much as possible. Exactly because of this...
RIFTEK: The kit is designed for non-contact laser scanning of objects in order to obtain a three-dimensional model and generate files suitable for further use in CNC machines. The kit includes a laser sensor, a synchronization module and a software package...
Micro-Epsilon: Laser profile scanners from Micro-Epsilon perform true 3D measurements based on calibrated data. TU-Darmstadt already uses this technology. The powerful 3D sensors of the scanCONTROL 2900 series perform high-resolution measurements...
Waycon: As the successor to the LAM series, laser distance sensors of the LAW series offer a linearity of 2 µm and a resolution of 0.06 µm with a measuring range of 4 mm. Unlike its predecessor, the LAW series has integrated...
Micro-Epsilon: Laser scanners from Micro-Epsilon are used for the geological analysis of drill core and mineral samples. With its special x-ray analysis equpiment (XRF scanners), the company Cox Analytical Systems relies on the sensor technology...
Pilz GmbH & Co. KG: Additional digital inputs and outputs are now available for the safety laser scanner PSENscan: Up to 70 switchable configurations can now be implemented and up to three separate safety zones can be monitored simultaneously...
Micro-Epsilon’s optoNCDT 1900LL sensors are designed for distance measurements on metallic and structured surfaces. These sensors use a small laser line in order to achieve precise measurements on inhomogeneous surfaces. optoNCDT 1900LL...
Micro-Epsilon: The thicknessGAUGE system measures the thickness of strip and plate materials reliably and with the highest precision. Depending on the measurement task, different variants with different sensor technologies are available. In...
Micro-Epsilon: In order to precisely determine the changeover time of coils, optoNCDT ILR2250-100 laser distance sensors from Micro-Epsilon continuously detect the coil diameter with highest precision. They can also be used in harsh industrial...
