Exergen Global: Measuring the temperature of bread and pastry dough while mixing is important since too high a temperature will cause too much rise, resulting in holes in the baked product, and too low a temperature will not allow the dough to...
SICK AG: Inclination sensors from SICK’s TMS/TMM family take a non-contact measurement of the inclination angle of an object in relation to the earth's gravity. Thanks to the use of capacitive MEMS technology, inclination sensors are both...
Micro-Epsilon: The idiamCONTROL permits precise planning of the maintenance intervals or replacement intervals of the individual extruder housing parts. With compound extrusion lines continuous wear signs occur in the bores caused by abrasive raw...
Micro-Epsilon: The new boreCONTROL LAB measurement system detects the diameters of cylindrical inside geometries. The micrometer-precise system can also be used for surface assessment and defect detection. boreCONTROL LAB is a benchtop device...
Sensor Technology: Monitoring torque in a drive shaft is one of the best ways of assessing the performance of plant and machinery. However because drive shafts rotate, hard wiring a sensor into place usually requires the use of a delicate slip...
Melexis:Temperature is the most often measured physical parameter. However, remote non-contact temperature measurement has previously been complicated and expensive due to the complex signal treatment and calibration...
Micro-Epsilon: The new thermoMETER CTP-3 infrared pyrometer enables the non-contact temperature measurement of thin polypropylene, polyethylene and polystyrene film. It operates at a wavelength of 3.43µm which is especially suitable for...
Micro-Epsilon: Precise non-contact temperature measurement from -40 to 1,800°C. The thermoMETER product group is targeted at industrial users. The infrared sensors comprise eleven products for stationary use. Amongst others, this includes...
Sensor Technology: The latest model of TorqSense, the non-contact digital torque measuring system, incorporates an integral sprocket or pulley, allowing easy fit-and-forget mounting in a vast range of plant and machinery such as drum mixers,...
Variohm EuroSensor: Contelec’s ultra-compact and durable Vert-X 05E encoder perfectly suits precision rotary position control applications in heavy duty machinery where space is restricted and where simple installation and competitive cost...
SONOTEC: The optimized ultrasonic limit switch SONOCONTROL 15 detects quickly and reliably whether a pipe is filled with liquids / liquid gases or not. The compact sensor is mainly used in plants of the pharmaceutical sector and the food industry....
SONOTEC: With the influence of digitization and increasing needs for process monitoring, laboratory, R&D, and single-use production environments are changing rapidly. Networked laboratory devices with smart functions, automation...
XY-TEK: Liquid Chromatography/HPLC is an instrument used to separate, detect, and analyze compounds. It does this by splitting a mixture into parts. Then, it does a quantitative and qualitative analysis of each part. Scientists and researchers use...
Physik Instrumente (PI): In N-603 linear positioning stages, Physik Instrumente (PI) has replaced a conventional piezo actuator with a high-resolution piezo stepping drive of the NEXACT® series, which – theoretically – has an unlimited travel...
Physik Instrumente (PI): Norbert Ludwig, Managing Director for Sales and Marketing at Physik Instrumente (PI) GmbH has been appointed as further managing director at PI miCos GmbH. At PI miCos, he will be responsible for the sales and marketing...
Inertial Labs, Inc.: Northwest UAV has partnered with Inertial Labs to add their best in class positioning, navigation, and orientation technologies to NWUAV’s impressive list of UAS technologies and services. Maintaining a constant focus on providing...
PCB Piezotronics, Inc.: The Vibration Division of PCB® Piezotronics, Inc. introduces a new accessory model to its acoustic product line. Model 079B21 is a Nose Cone designed to be...
Baumer: Baumer Hübner has established the class of extraordinarily resilient and reliable HeavyDuty encoders and offers a broad portfolio. Manufacturers of cranes and hoists are among the most frequent users of such sensors. And for good...
Baumer: The new CMOS-based CX series polarization cameras with GigE and USB 3.0 by Baumer, uses the polarization properties of light and thus allows a wide range of new industrial image processing applications, e.g. for quality control in glass...
Variohm EuroSensor: Novotechnik’s TFD-4000 series short-stroke linear transducers are an ideal and economic solution where minimal size, high environmental protection, extremely long life and high reliability are key factors for medium to...
Melexis: The drive for green power and mobility demands next generation current sensor technology. Melexis’ introduction of its MLX91206 custom programmable IMC-Hall-Sensor provides an ideal solution. Melexis takes a next step into driving green...
SNT Sensortechnik AG: Edges of running webs and belts get laterally misaligned after a short time without permanent external control. Typical applications are found for example in the manufacture and processing of foils, paper, tin or textiles,...
Manner sensor telemetry: Emission standard Euro 4 has now reached trucks. Providing an optimal match between engine and transmission is of particular importance for CO2 emissions and fuel consumption data. For this purpose, appropriate...
Baumer introduces a new clever accessory for its Series 14 photoelectric sensors: a novel frame adapter. This plastic adapter allows for a simple installation of the sensors without the use of screws or tools. They are mounted with just two clicks...
Variohm: ADZ NAGANO, the leading German industrial sensor manufacturer, has developed a novel load sensor that provides a high precision force output up to 500 N and a temperature compensated range of -20 to +60 °C. Available in the UK from...
Sensor Technology: Non-contact torque sensors from Sensor Technology are playing a key role in the development of commercial-scale in-stream tidal turbines produced by Irish company, OpenHydro. The company is using these novel sensors, which are...
Variohm EuroSensor: Now available from Variohm EuroSensor, Novotechnik’s recently launched RFX-6900 series touchless technology angle sensor is ideal for precision rotary position feedback for mechanically-extreme applications in automotive,...
Variohm EuroSensor: Available in the UK from Variohm EuroSensor, Novotechnik's RFC-4800 series touchless technology angle sensors are well proven for industrial and mobile equipment measurement tasks. A wide choice of analogue and digital output...
Variohm EuroSensor: Through its exclusive UK distribution partnership with measurement technology leaders Novotechnik, Variohm EuroSensor supplies and supports linear and rotary sensors that feature the standardised communications protocol...
PCB Piezotronics, manufacturer of the industry's best-selling piezoelectric ICP® shock accelerometer family, introduces a new mechanically isolated, electrically filtered nearfield or farfield pyroshock sensor that is capable of measuring up...
