greenTEG AG: Carlos Ziebert from the Battery Calorimetry Lab of the Karlsruhe Institute of Technology (KIT) presented his work at the 6th International Conference on Thermal Management for EV/HEV in Berlin.
greenTEG AG: Light detection and quantification is fundamental to the functioning of a broad palette of technologies. While expensive avalanche photodiodes and superconducting bolometers are examples of detectors achieving single-photon...
greenTEG AG: Researchers at ETH Zurich’s Department of Environmental Systems Science used greenTEG’s sensors to measure latent and sensible heat fluxes from (artificial) plant leaves. The research has been published in Hydrology...
greenTEG AG: Badly insulated windows account for a great part of the heat loss of a building. In-situ data on the insulation quality (U-value) of window glass is therefore an indispensable piece of information when considering different measures...
greenTEG AG: Battery calorimetry is important to increase the safety and quality of batteries. Standard battery calorimeters are however expensive and the experiments time consuming. greenTEG’s thin and highly sensitive heat flux sensors...
greenTEG AG: Researchers from the Swiss Federal Institute of Technology developed a zero-power, bioinspired heat sink where the thermal resistance is reduced with increasing ambient temperature whereas the heat flux through the heat sink is...
greenTEG AG: Researchers at Harvard University studied how pores in building materials can be designed, such that incoming fresh air can be efficiently tempered while conduction losses are kept to a minimum. With the use of gSKIN® Heat Flux...
greenTEG AG: In our latest case study the theoretical U-value based on a calculation model is compared with a U-value based on a heat flux measurement with greenTEG’s gSKIN sensor. An office wall at Technopark, a business and meeting center...
greenTEG AG: The gO Measurement-System is a cloud-based, wireless system for U-value, R-value, surface temperature, and humidity measurements. It allows for simultaneous measurements with up to 16 sensors and real-time remote monitoring. It is the...
greenTEG AG will present its laser power and position sensors at Optatec, hall 3, booth J25. Among the latest innovations of greenTEG are a laser power sensor with digital signal output and temperature compensation as well as a tiny 2x2 mm2...
greenTEG AG: Core body temperature is one of the four primary vital signs of our body. greenTEG offers the first solution to monitor core body temperature continuously and non-invasively. The sensor can be easily integrated into any wearable...
greenTEG AG: In our latest case study we show you how a U-value measurement will tell you whether the contractor botched up the insulation job. The owners of a newly built single-family home wanted to get the MINERGIE certification for the...
greenTEG AG is pleased to announce new partnerships for the distribution of its laser power detectors in Korea (UniOTech), UK (Pacer), and the US (EOC and Pacer). greenTEG will launch new high-precision laser power detectors this month at Laser...
greenTEG AG: Scientists at Southeast University’s School of Energy and Environment (Nanjing, China) used gSKIN® Heat Flux Sensors to characterize the dynamic thermal performance of a novel triple-glazed window filled with...
greenTEG AG: Researchers used greenTEG’s gSKIN heat flux sensors to study the effects of electrode composition on heat generation in Electrical Double Layer Capacitors (EDLCs). The heat flux sensors were integrated within an isothermal...
greenTEG AG: Researchers from the University of California used greenTEG’s gSKIN®-XI Heat Flux Sensor to investigate the thermal properties of a simple and cost-efficient installation approach of low-emissivity (low-e) films on windows....
greenTEG AG: LafargeHolcim assessed greenTEG’s gO Measurement System (gOMS) in a HotBox/ColdBox (HB/CB) experiment. The HB/CB is an industrial scale tool designed to test whole building elements such as walls in different artificially...
greenTEG AG: In a novel application case study, LemonConsult in Zurich used the gO-Measurement System to estimate the specific thermal capacity of building components per unit surface area. Contact us if you have any questions about this case...
greenTEG AG: The updated gRAY Laser Power & Position Sensor product brochure is now online. We will also present our latest innovations at Laser World of Photonics this month in Munich. Download the new brochure with our latest innovations for...
greenTEG AG offers a wide range of innovative OEM laser power and position sensors for high-precision measurements in applications such as med-tech, cutting, welding, soldering, marking, and 3-D printing. greenTEG AG will present an exciting new...
greenTEG AG: We will present a solution for non-invasive continuous core body temperature measurements at the Websummit 2017 in Lisbon. Core body temperature is an important parameter when assessing the state of health of the human body....
greenTEG AG: After a thorough due diligence, experts at the Swiss Economic Forum awarded greenTEG with the “SEF.High-Potential SME” label. Recipients of the label are deemed to hold great potential for substantial growth in the short...
greenTEG AG has been selected for the Vertical Collaboration Program spring 2018. The program, focussed on Healthcare, is supported by Samsung and Pfizer. The Vertical Collaboration Program aims to bring new value-adding solutions to market...
greenTEG AG: We are proud to be among the finalists for Merck’s Displaying Futures Award and will present our core body temperature sensor for wearable and med-tech applications. We are very excited to participate and look forward to...
greenTEG AG: With greenTEG’s U-Value Kit the thermal insulation quality (U-value) of building elements can be measured precisely. The data helps making informed decisions when assessing and planning for energetic refurbishments of buildings....
greenTEG AG: Laser beam alignment can be tricky. With our newly launched gRAY laser beam position detectors you can detect the position and measure the power of your laser beam at the same time. The laser beam position detectors are sensitive to...
greenTEG AG: The European Union’s Horizon 2020 Program is the largest research and innovation funding program ever launched to support scientific progress. Under this program, the EU granted greenTEG phase 1 funding of 50’000€ to...
greenTEG AG: Last month, the Solar Impulse Foundation awarded the 1000 solutions label to the gO Measurement System (gOMS) - the leading measurement device for planning energetic retrofits of the building stock. The foundation highlights the...
greenTEG AG: We are thrilled to announce that greenTEG has been awarded the Horizon 2020 Seal of Excellence, issued by the Executive Commission for Small and Medium-Sized Enterprises, a body of the European Commission. This seal recognizes...
