SICK AG: The FWE200DH represents SICK's next stage in the development of a dust measuring device for measuring dust concentration in wet gases. The gas is extracted via a sampling probe and heated above dew point. Any droplets in the gas vaporize,...
SICK AG: The SICK flame ionization detector represents both a compact analyzer and a professional device for continuous hydrocarbon measurement. The GMS800 FIDOR combines rugged design, simple operation, precise measurement, and modern interface...
Pilz GmbH & Co. KG: The automation company Pilz has opened a production site in the Chinese city of Jintan. In its first production site outside of Europe, the family business from Baden-Württemberg will produce PNOZ safety relays to its...
PCB Piezotronics is pleased to announce two new accelerometers, Models 357D92 and 35793, that make measurements with better accuracy and lower noise, during large temperature variations. "The crystal technology inside makes high temperature...
SICK AG: With the MCS300P, SICK has produced a compact device with proven measurement technology specifically for process gases. The multi-component analyzer system for high-quality products provides reliable measurement results thanks to...
SICK AG: With its LFP Cubic and LFP Inox level sensors, SICK is offering solutions that are suitable for any application, in any setting – whether it involves continuous level measurement, point level measurement, or a combination of the...
Baumer, the encoder expert, has further completed the HOG 86 encoder family by adding some new variants. Baumer continues the practice-proven concept of shaft bearings on both sides combined with significantly enhanced high-precision optical...
Micro-Epsilon: Equipped with a scanCONTROL laser scanner from Micro-Epsilon, a special vehicle inspects the inside of a pipeline for deformations and cracks. This mobile device is used in harsh environmental conditions and high ambient...
Novotechnik introduces the Contelec brand of Vert-X 8800 Series of non-contact angle sensors. Diameter of the stainless steel housing base is 88 mm. Vert-X 8800 Series sensors measurement range is 0 to 360° with repeatability of 0.1° and...
WIKA: For level monitoring in cryogenic tanks, WIKA is currently the only manufacturer of a complete system. It combines the mechanical and electrical recording of the measured values locally with a decentralised control via the intelliMETRY...
Baumer: Global shutter sensors IMX174 and IMX249 of the latest Sony CMOS generation are now integrated in six new models of the Baumer VisiLine cameras – both in mono and color and IMX174 even in an IP 65/67 rated housing. Thanks to 1920 x...
Melexis: Rutronik Elektronische Bauelemente GmbH and Melexis have signed a global distribution agreement covering Melexis’ entire product portfolio of sensors, sensor interface ICs, driver ICs and communication ICs. Melexis offers an...
Micro-Epsilon presents the new, confocal chromatic sensors for the confocalDT measurement system. The IFS2406 series stands out due to its compact design and high precision. As well as for distance measurements at submicrometer accuracies, the...
HBM: The Perception software from HBM Test and Measurement (HBM) has a new feature in version 6.60 to make adjustments for individual user requirements, making it much more user-friendly. Perception version 6.60 offers more flexibility to...
HBM Test and Measurement expands its product portfolio for optical measurement technology. The products are primarily used in structural testing and the development of light-weight materials. Light-weight materials are increasingly used in the...
Sensor Technology: Dedicated to developing innovative hydrokinetic turbines to generate “green” energy from the motion of the sea, Irish company Tidal Energy Limited (TEL) recently had a pressing need for a way of accurately of...
greenTEG AG: The energy performance of a building envelope and corresponding U-values can be accurately estimated in an analytical way if the material values of its constituent layers and the influence of the environmental conditions are well...
WIKA: The safety of the UPT-2x process transmitter from WIKA is certified globally: The universal instrument has achieved approvals for use in hazardous areas in accordance with IECEx, ATEX and now also EAC. The multi-functional UPT-2x is a...
HBM Test and Measurement further consolidates its leading position in force measurement technology. HBM looks back on many years of experience in the design and production of force transducers. The first force sensor produced in series was placed...
WIKA: New application possibility for the TR21 miniature resistance thermometer from WIKA: It is now also available in an autoclavable design. The basic requirement for the use of the TR21 in sterilisation processes under saturated steam...
HBM: In all development and production processes, reliability engineering embedded in Design for Reliability (DfR) is increasingly important to manufacturers. ReliaSoft is a member of the HBM group and offers a comprehensive range of seminars for...
Zemic Europe has launched a new Load Cell mount for the Weighbridge’s Compression Load Cell BM14G4-W1 – the new Mount HM-14-441. By using the new mounting assembly for the BM14G4-W1 compression load cell it is even more easy to...
Allegro MicroSystems: The new A1454 from Allegro MicroSystems Europe is a linear 3 V Hall-effect sensor IC that provides a 12-bit digital I2C output that is proportional to the strength of the magnetic field that is present. The A1454 is targeted...
Pewatron launches the new air quality gas sensors from SGX Sensortech. The MEMS based MiCS MOS sensors simplify the process of detecting gasses that impact air quality. Using innovative metal oxide semiconductor chemistry (MOS) supported by a...
Pewatron: Fujikura officially released the new digital AL4 series of gauge low pressure sensors for volume production. The AL series has a very small footprint (11.36 mm x 10.32 mm) in comparison with other low sensors, SMT pin configuration and a...
Turck: At the Achema fair, Turck is presenting the IMX18-CCM (Cabinet Condition Monitoring) cabinet guard, a new multi-function device which can be installed and also retrofitted in virtually any control cabinet or box in order to continuously...
Zemic Europe: As a designer and manufacturer of millions of strain gages Zemic has developed itself as a specialist of custom made miniature sensors. Due to the limited space in a machine or the special mounting requirements it is a continuous...
Pewatron launched the new digital A4 series of gauge pressure sensors from Fujikura. The A series is compatible in footprint and pin configuration with the highly successful F and X series, but with higher total accuracy (+/-1.5%) and a wider...
Pewatron is pleased to announce the launch of the newest family of vibration sensors from Colibrys. The VS1000 has been developed using newest patented technologies. This sensor offers lowest non-linearity and noise in MEMS technology so far. It...
Bourns, Inc., a leading manufacturer and supplier of electronic components, announced that for the second year in a row it has received TTI’s Supplier Excellence Award at the Platinum Level for its Americas, European and Asia operations. TTI...
