Jewell Instruments: The JMA-100/200/300 accelerometer series, a robust and affordable acceleration solution, is now available with ±4 g and ±10 g measuring ranges. These additional ranges are intended for applications that...
BCM Sensor: A new model AC101 from BCM SENSOR is one-axis capacitive accelerometer designed for a wide range of applications where dynamical model correlation or analysis needs to be performed in vibration test, shock test, and vibration...
PCB Piezotronics PCB's new UHT-12™ miniature accelerometer was designed for applications that demand minimal sensitivity change across a wide temperature range. Model 320C53 features a sensitivity of 1 mV/g to complement the Model...
Mentor Graphics: It’s hard enough to design mixed-signal processing onto the same chip as a MEMS device, but MEMSIC has managed to integrate these technologies on the same silicon and sells millions of accelerometers in a variety of...
Silicon Designs, Inc. announced the global market introduction of six new series of low-cost, high-performance MEMS capacitive accelerometers, in both traditional and smaller footprints. These include the single axis Model 2220 or triaxial...
Silicon Designs, Inc., a 100% veteran owned small business and leading industry expert in the design, development and manufacture of highly rugged industrial-grade MEMS capacitive accelerometer chips and modules, today announced the added...
DJB Instruments has announced the launch of the AF/50/5 and AF/100/10 IEPE Impedance heads which integrates an IEPE accelerometer and force sensor into one device to measure dynamic acceleration and force simultaneously.
PCB Piezotronics: A new miniature teardrop ICP® accelerometer is released by PCB Piezotronics, Inc. Model 352A74 has a sensitivity of 100 mV/g and a measurement range of ±50 g peak. The sensor is hermetically sealed in a low profile...
Jewell Instruments: The JMA-100/200/300 accelerometer and JMI-100/200 inclinometer series, the latest additions to Jewell Instruments’ MEMS sensor line, are now available with 4-20mA output (JMA-L, JMI-L). This output option provides ease of...
Jewell Instruments: The JMA-100/200/300 accelerometer series is among the latest additions to Jewell Instruments’ MEMS sensor line and is now available in a single power input version (JMA-100/200/300-S) with a 0-5 VDC output signal. This...
Advanced Sensors Calibration (ASC), one of the world’s leading manufacturers of capacitive, piezoresistive and piezoelectric accelerometers, angular rate sensors and inertial measurement units has announced an upgrade to their Offshore (OS)...
DJB Instruments has announced the launch of the AT/18 ultra-lightweight micro-miniature triaxial IEPE accelerometer. In line with the company’s drive to produce robust, reliable accelerometers the AT/18 features three fully independent...
PCB Piezotronics: A new family of miniature triaxial ICP® accelerometers, Models 356A43, 356A44 and 356A45, are introduced by PCB Piezotronics, Inc. They are small (0.4 x 0.4 x 0.75 in), lightweight (4.2 grams) and TEDS IEEE 1451.4 enabled....
Jewell Instruments: Introducing the JMA-100/200/300 accelerometer series, the latest addition to Jewell Instruments’ MEMS sensor line. This is a versatile, rugged and robust sensor that is a low-cost alternative to most traditional...
Jewell Instruments is proud to add the SMA Emerald Series accelerometer to its precision sensor line. This single-axis, dual-ended power supply accelerometer offers the high precision of force balanced technology, but at a lower cost than other...
Advanced Sensors Calibration (ASC), the leading manufacturer of accelerometers, angular rate sensors (gyro) and IMUs (inertial measurement units) is celebrating its 10th anniversary. The company, founded by Peter Bay in Ingolstadt in 2006, looks...
Advanced Sensors Calibration (ASC) has announced the introduction of medium-frequency (MF) accelerometers, a new family of MEMS-based capacitive accelerometers. The MF series is intended for test & measurement, condition monitoring and...
Advanced Sensors Calibration (ASC) has announced the introduction of a new family of low-cost, rugged piezoelectric accelerometers, the P311A series, designed for vibration monitoring in industrial environments. “The launch of the P311A...
Jewell Instruments: Introducing the JMA-165 accelerometer series, the latest addition to Jewell Instruments’ RailStar and MEMS sensor lines. This is the industry’s first MEMS sensor to meet CENELEC/AREMA requirements for rail...
Advanced Sensors Calibration (ASC) has announced the introduction of three new families of 4-20 mA current output accelerometers for structural monitoring applications. The new release includes a low-noise series and a high-bandwidth series, both...
Advanced Sensors Calibration (ASC): has announced the launch of three new product groups of piezoelectric accelerometers for applications in the automotive, wind energy and railway markets. The new products being launched include the ASC P101A,...
InnaLabs® Ltd: At the Inertial Sensors and Systems Symposium Gyro Technology Conference at Karlsruhe, Germany, Mr Jose Beitia, Chief Technical Officer at InnaLabs® Ltd announced the release of new navigation grade performance...
InnaLabs® Ltd is delighted to announce that InnaLabs® Chief Technical Officer Mr. Jose Beitia will deliver a paper on Quartz Pendulous Accelerometers for Navigation and Tactical Grade Systems at the prestigious 2015 DGON Inertial Sensors...
InnaLabs® Ltd: InnaLabs® Ltd today introduced the newest additions to its series of Quartz Servo Accelerometers. Built in Europe, ITAR-Free and offering improved long term stability, the AI-Q-2010, AI-Q-1410 and AI-Q-710 are the...
Jewell Instruments: Jewell’s force balanced quartz flexure offering has been expanded with the addition of the QFA-150 Series Standard accelerometer. The QFA-150 uses mid-temperature range quartz technology that also provides high...
Colibrys joins Memsense to highlight the value offered in the MX IMU. The MX IMU brings unprecedented value to the MEMS IMU market through the incorporation of the Colibrys MS9000 series accelerometers. Never before has such a high level of...
DJB Instruments is pleased to announce the release of a new accelerometer which joins its growing product range. The new IEPE A/127/V is a miniature teardrop integral electronics voltage source piezoelectric accelerometer. It uses the unique Konic...
DTS has expanded capabilities for the TSR Data Logger line to include a new ±20 g sensor range. With built-in XYZ accelerometers that eliminate the need for time-consuming sensor hook-up, an internal battery and simple software, the TSR...
PCB Piezotronics: Designed for measuring vibration on small objects where mass loading and accuracy are a concern, PCB's new Model 352A57 miniature accelerometer weighs only 1.3 grams and is TEDS enabled. This sensor also offers a 2.5mV/g output...
