Turck is presenting HART modules for its excom I/O system with fully galvanically isolated channels. This prevents therefore any potential transfers and the resulting corruption of measured values. The temperature resistant HART modules for inputs...
Pepperl+Fuchs: The robust housing of the G20 motor module is <30 mm tall so that it can be easily integrated in the mounting strip. It has a direct connection for two DC roller motors and two congested track scanners. This solution does...
Turck is presenting the TBPN safety block I/O module, which is the first module to combine both standard and safety inputs/outputs in a single device. The IP67 hybrid modules can be adapted flexibly to the specific signal requirement in the...
Turck is showcasing at the SPS IPC Drives fair its block I/O modules with the AIDA connector system. The company is thus able to develop further applications for its robust I/O modules in the German automotive industry. The simple push-pull...
Turck: Turck's IMX12 interface series is now suitable for worldwide use thanks to new international approvals. Besides ATEX for Europe, NEPSI for China, Inmetro for Brazil (currently only DI) and IEC-Ex as a worldwide reference standard, the...
Turck: Turck optimizes the grips of its two TX and TE connectivity series. A new hexagon nut has now been integrated in the knurled grip of the connectors. The improved wrench contact surface simplifies the secure tightening of the plug connectors...
Pepperl+Fuchs: How could AS-Interface be made even better? By enhancing the convenience with which connections are established, speeding up the installation process, and saving on space in the switch cabinet — space that can be expensive....
Pepperl+Fuchs: Virtually all automation components require at least one connection line for the purposes of transmitting information and/or supplying power. However varied applications in the field of automation may be, the requirements placed on...
Texys International, French leader in high performance embedded testing sensors, is proud to announce the release of THNF-A, the new single channel thermocouple conditioner with 0-5V and digital outputs (serial link). Based on the same...
Balluff: The sensor specialist and industrial networking provider Balluff is offering a new generation of clamp mountings. Users will be delighted to learn that tools are no longer needed for mounting or exchange of M12, M18 and M30...
Balluff: The sensor specialist and industrial networking provider Balluff is offering a new generation of clamp mountings. Users will be delighted to learn that tools are no longer needed for mounting or exchange of M12, M18 and M30...
Balluff: Sensor specialists and networking supplier Balluff presents its IO Link Master modules for DeviceNet and EtherCAT. They are ideal solutions to implement decentralized automation concepts without control cabinet in IP 67 with M12...
Leuze electronic: Within the MA 200i series, Leuze electronic now also offers modular interfacing units for DeviceNet, EtherNet/IP and CANopen connections. All peripheral devices – such as sensors, protective switches and cameras – are not...
Mantracourt announces the new Bridge Completion Module (SGABCM), a small retro-fit PCB which facilitates connecting a half or quarter-bridge strain gauge to their SGA Load Cell conditioner. An important feature of the Bridge Completion Module is...
Texys International is proud to release its new THN4X-K-IS-MC-CAN. Based on the digital version of our patented thermocouple connector/amplifiers, that version brings high accuracy in a compact housing and delivers the 4 readings through the CAN...
PCB Piezotronics, Inc., a global leader in the design and manufacture of microphones, vibration, force, torque, load, strain, and pressure sensors, as well as the pioneer of ICP® technology is pleased to announce the availability of new and...
HBM: The construction of modern commercial aircraft today increasingly involves the use of innovative composite materials such as GRP or GLARE (glass-fiber reinforced aluminum). The handling of these materials during assembly sets new challenges...
PCB Piezotronics, Inc.: IMI Sensors, a division of PCB Piezotronics, Inc., announces the availability of breakaway safety cables designed to protect technicians and their equipment from being pulled into rotating machinery during route-based...
Leuze electronic: If, as is often necessary, several safety components are to act on a single switch-off circuit using a logical "AND" link, they can easily be connected to the new MSI-SR5 Safety Relay. Thus, using just one relay, the combined...
Balluff: In flexible automation, sensors and actuators must be able to track the movements of machines. Permanently wired sensors are usually unsuitable for such applications. Contactings and cables can only withstand movement for a limited time,...
Cognex Corporation has announced a new option to deliver its VisionView® operator interface to any VGA display. VisionView VGA is a low-cost DIN rail-mount adapter that provides direct VGA output for the VisionView application software, allowing...
Dytran Instruments, Inc. manufactures custom cable bundles for a variety of applications and environments. Whether you are conducting a large scale modal test, remote field NVH test, or are working in an environmental test cell, Dytran designs and...
Dytran Instruments, Inc. Dytran Instruments is pleased to announce the redesign of our ultra low noise cables. This includes the following model numbers: 6013A, 6019A, 6025A, 6036A, 6049A and 6056A. Prior to this change, these cables met all...
Cognex Corporation announces Cognex Connect™, the most comprehensive suite of communications capabilities ever offered in a vision system. Cognex Connect enables out-of-the-box connectivity between Cognex In-Sight® vision systems and virtually...
B+B Thermo-Technik GmbH: B+B Thermo-Technik GmbH offers in his product range PVC – Cables with an extended Temperature Range. According to the PVC design Operating Temperatures from -30°C (-22°F) to +125°C (257°F) respectively -60°C...
Kistler offers a multitude of cooling and switching adapters for accurate measurement of absolute pressure in the exhaust system of combustion engines. Sensors installed in cooling adapters are constantly exposed to the exhaust gases, while...
Balluff: The new BFB 75K fiber optic base unit from Balluff with IP 64 protection offers not only an attractive design, but also extraordinary switching accuracy and switching frequency. The use can choose from among the economical basic model for...
Balluff: Holders for positioning 8 x 8 sensors in aluminum extrusions used to be expensive one-of-a-kinds. None of the sensor manufacturers offered them in their catalogs, and the user had no alternative but to fashion handmade, rail-specific...
Baumer: To make the best use of the advantages of miniaturization, Baumer offers a complete range of very compact inductive sensors with M5 x 0,5 mm plugs and matching plug connections. This unique range includes both digital and analog sensors in...
HBM: The latest design of HBM’s VKK1-4 junction box features an integrated resistor network for precise off-center load compensation in scales.The junction boxes are used for connecting four strain-gage (SG) load cells and need only three steps...
