Turck: At the Hannover Messe Turck is showcasing ARGEE – a simple PLC functionality for Turck's multiprotocol block I/O modules in IP20 and IP67. ARGEE enables PLC functions to be programmed directly on the modules of the TBEN-L, TBEN-S, BL...
Turck is now also offering a communication module with serial interfaces for its ultra compact TBEN-S Ethernet block I/O series: The TBEN-S2-2COM module comes with two serial ports, which can be individually configured as RS232 or RS485 interfaces...
Turck has introduced a long-range dual display fiber amplifier with a high power LED that drives large amounts of light through small core fibers. The new DF-G3, developed by Banner Engineering, Turck’s partner for optical sensors, joins the...
Turck:Premiered at this year's Hannover Messe is Turck's new BL compact RFID module with an Ethercat interface. The robust IP67 I/O module enables the BL ident RFID system to be connected directly to Ethercat master...
Turck is presenting HART modules for its excom I/O system with fully galvanically isolated channels. This prevents therefore any potential transfers and the resulting corruption of measured values. The temperature resistant HART modules for inputs...
ETLG Inertial Aerosystems: The CPe-4000 series are Compact PCI-Express (cPCIe) and PXI Express (PXIe) compliant I/O cards for the simulation and measurement of Synchros, Resolvers, LVDT/RVDT. Up to 4 channels of output plus up to 2 channels of...
PCB Piezotronics, Inc. expands the 482C signal conditioner series with the introduction of Model 482C24. This 4-channel conditioner includes DC coupling that is selectable on a per channel basis. It is ideal for use with ICP® force, and...
Balluff: The basis of Industry 4.0 is the availability of all relevant information in real time as well as the ability to at all times derive the optimal value creation flow from the data. This can only succeed if all the entities involved are...
Balluff: IO-Link actuator/sensor hubs from Balluff feature eight ports for 16 in-/outputs. They allow for example signals from up to 16 switching sensors to be collected from a distance of up to 20 m so that they can be made available to the...
WIKA: The isolated barrier model IS Barrier completes WIKA's range of intrinsically safe products. The barrier is suitable for installation in zone 2 and is compatible with all corresponding transmitters from WIKA. For use in hazardous areas,...
Balluff: RFID systems with various read/write distances and resulting frequency ranges are finding increasing use in modern production and assembly plants. Frequency-dependent use is now offered for the first time by the new BIS V processor from...
Balluff: One of the most coveted design prizes goes to the Industrial RFID Read/Write Head from Balluff. It received the Red Dot Award: Product Design 2015. The international jury was impressed by its high design quality and successful styling....
HBM: The new version of HBM's Perception software for ultra high-speed data acquisition also simultaneously acquires slower CANbus signals while simplifying handling with freely definable buttons (User Keys). Perception and Genesis high-speed data...
Pepperl+Fuchs: SmartBridge provides an additional communication path from the field level without the need for costly wiring or installation work. This allows smartphones or tablets to be used as convenient operating tools and for sensor and...
Delphin Technology AG: As from now, Expert Logger devices can be equipped with an internal LTE/UMTS interface. This makes them ideal for the independent monitoring of machinery, test stands and building structures or the decentralised measurement...
WIKA has developed a new digital temperature transmitter, model T15, in a head-mounted and rail-mounted version - with more-powerful electronics and optimised case design. The new transmitter with analogue output processes signals from resistance...
Delphin Technology AG: "Sniffing" in measurement technology is understood as the passive listening in on a bus system. Data is transmitted via a bus system can then be recorded with a sniffer. But because the sniffer is not an active participant,...
Balluff: The new transducers in rod and profile housings with an Ethernet interface from Balluff offer multiple advantages for machine manufacturers and operators with respect to startup and machine output. The standardized communication protocols...
Delphin Technology AG: Expert Vibro is a new measurement device, from Delphin Technology AG (based in Germany´s Bergisch Gladbach), for the acquisition of transient signals and vibrations. Vibration measurement is made easy with Expert...
Pepperl+Fuchs: Able to transfer data without wires or radio signals, across distances of up to 300 meters, without minimum distances, and at speeds of 100 Mbit/s: The LS682 optical data coupler far surpasses the performance of its...
Delphin Technology AG: Expert Vibro is a state of the art device that combines analysis, diagnosis and monitoring in one system. It is a high precision device that is fast, compact and intelligent. Expert Vibro makes it easy to utilize vibration...
Melexis, a global microelectronics engineering company, has introduced the MLX73290-M. This multi-channel RF transceiver IC draws on the company’s long-established technical expertise in low power wireless implementation. Addressing the...
ZMD AG (ZMDI) announces the new ZSSC4151. As a global supplier of analog and mixed-signal solutions for automotive, industrial, medical, information technology and consumer applications, ZMDI is pleased to introduce a state-of-the-art sensor...
HBM: The QuantumX MX460B digital pulse and frequency amplifier from HBM Test and Measurement (HBM) enables dynamic, reliable torque and rotational speed measurements that respond to the varying requirements of different drives. The same can be...
HBM enables more efficient engine tests for the automotive industry with the PMX industrial measuring amplifier system. Noise-free measurement processes and precise process control are two key advantages. The goal is to continue developing the...
Balluff: Industry 4.0 is implementing not only the intelligent networking of process devices, but also the linking of the manufacturing management level with the IT and company management levels. Seamless communication from the sensor all the way...
Balluff: In the RFID processor unit BIS V, Balluff has introduced a real multitalented solution to the market. Thanks to its compact pro-cessor unit, up to four read/write heads can be connected. Both HF (13.56 MHz, in accordance with ISO 15693...
ZMD AG (ZMDI) is an award-winning global semiconductor company headquartered in Dresden, Germany, and specializing in enabling energy-efficient solutions. In keeping with ZMDI’s commitment to the design and development of high quality...
HBM: The CMD2000 industrial charge amplifier for piezoelectric force sensors from HBM Test and Measurement (HBM) combines an extensive measuring range, from 200 pC to 2 million pC, equivalent to 500 newtons to 500 kilonewtons, with a compact...
