Inertial Measurement Unit, IMU

Inertial Labs, Inc.: Bathymetric or Hydrographic surveys are survey methods used for submarine topography that have been implemented for observation of marine landscapes and structures for several decades. With the technology for executing a survey becoming...

Inertial Labs, Inc.: Companies that adopted the first microelectromechanical (MEMS) accelerometers and inertial measurement sensors in the 1990s have struggled to find affordable solutions to replace sensors that have been discontinued due to the advent of...

Inertial Labs, Inc.: A shift towards a new generation of advanced Command Post Terminals (CPT) is happening gradually on several frontiers. This new generation, known as the Family of Advanced Beyond-Line-of-Sight Terminals (FAB-T) is expanding upon...

Inertial Labs, Inc.: Sensor fusion plays a large role in any device that is attempting to produce estimated, quantifiable data. Sensor fusion is the ability to bring together inputs from multiple sensors to produce a single model whose result is more...

Xsens: MTi-Series GNSS/INS Motion Trackers from Xsens provide accurate 3D positioning in DG World’s AI-based software solutions, integrated into a fleet of Autonomous Trucks at Jebel Ali port. A ground-breaking deployment of autonomous...

Inertial Labs, Inc.: Embention began investigating Inertial Labs as a supplier for inertial measurement units (IMU) or attitude and heading reference systems (AHRS) in 2013. Their developing project would involve integrating such sensors with targeted...

Inertial Labs, Inc.: Aerial Photogrammetric analysis may be applied to a single image or high-speed imagery and remote sensing to detect, measure and record complex 3D motion fields. This is done by feeding measurements and image analysis into computational...

Inertial Labs, Inc.: Remote sensing emerged more than 150 years ago, as balloonists took pictures of the ground using the recently invented photo cameras in the 1840s. Perhaps the most memorable breakthrough in the field at the end of the 19th century was...

Xsens, the manufacturer of motion sensing modules, has signed a sales distribution agreement with Clearpath Robotics, the manufacturer of robot development platforms, which will make it easier for R&D teams and university researchers to use...

Inertial Labs, Inc.: AirSatOne (ASO), an Aviation Satellite Communication Service Provider, reported that its test using a COBHAM AVIATOR UAV 200 for Satcom connectivity and the Inertial Labs INS-P for Position, Heading, Pitch, Roll, and Velocity data has...

Sensonor: The new high-accuracy tactical-grade STIM318 Inertial Measurement Unit (IMU) from Sensonor provides greatly increased accelerometer performance to support demanding guidance and navigation applications. Its performance can in many...

ETLG Inertial Aerosystems: The HGuide n580 is a small, light-weight, self-contained, all-attitude Inertial/GNSS Navigator which can be used in a wide variety of non-ITAR platforms, applications and industries where continuous navigation...

Sensonor: STIM300 is a small, lightweight and low power ITAR free high performance Inertial Measurement Unit (IMU). STIM300 is housed in a solid precision machined aluminum housing and it is insensitive to magnetic fields, it offers compared...

ETLG Inertial Aerosystems: Air, ground and sea missile and munitions designers face demanding accuracy requirements under the most extreme shock and vibration conditions, with size, weight and cost constraints.  Designed specifically for...