Sparton Corporation: Sparton Navigation and Exploration (NYSE: SPA) is introducing an enhanced MEMS based sensing Inertial Measurement Unit (IMU-10). Sparton’s IMU-10 has 10 degrees of freedom and provides industry leading accuracy. The...
Sparton Corporation presents AHRS-8, a highly advanced inertial sensor that enhances a best-in-class product line. The AHRS-8 is a MEMS-based (micro electro-mechanical systems) attitude heading reference system. Fully temperature compensated and...
Pewatron is pleased to introduce the new low-cost inertial unit from Silicon Sensing. DMU10 provides three axes of angular rate and linear acceleration and two measurements of temperature. The output message includes message counter, built-in...
Silicon Designs, Inc., a leading designer and manufacturer of industrial grade MEMS variable capacitive accelerometer chips and modules, announced the North American market introduction of its new low-cost, integral inertial accelerometer family,...
Jewell Instruments is proud to introduce the LSOX inclinometer family, adding to its precision force balanced tilt meter product line and including its first CE marked device. This single axis sensor family combines the high accuracy of force...
Colibrys, the Swiss MEMS manufacturer, announces a new product launch and strengthens its worldwide position as a high-end motion sensors supplier. This news closes an intense period of change that began in 2013 with the company buy-out from Sagem...
Jewell Instruments is proud to introduce nine new families of low-cost MEMS (Micro Electro-Mechanical Systems) inclinometers. They are the latest additions to Jewell’s quality line of high performance electronic tilt meters. Models span from...
Jewell Instruments is thrilled to introduce the new AMA and DMA series MEMS (Micro Electro-Mechanical Systems) accelerometers. They are the latest additions to Jewell’s quality product line of high performance and accuracy for inertial...
Jewell Instruments is pleased to introduce the Model SMI-L 4-20mA Force Balanced Inclinometer. This powerful single-axis tilt sensor offers the same high performance and low cost as our standard Emerald Series, but with a convenient 4-20mA output....
Colibrys announced the launch of the xOEMcore IMU/INS, integrating high-grade MEMS sensors in a small board set package. “The inertial sensors we selected from Colibrys were ideal for us because of its long term bias stability and high...
Sensonor: STIM300 will offer user access to more than 111 monitored parameters inside the sensor system. The IMU offer continuous self-monitoring status data 2000 times per second. This ensures access to reliable data in safety-critical...
ETLG Inertial Aerosystems has announced that the 700-Series Platform and Surface Mount Tiltmeters are now shipping from its UK distribution base. The tiltmeters are dual-axis analogue output devices manufactured by Jewell Instruments in the USA....
Pewatron: Outstanding stability and low noise make the CRH01 a viable and more affordable alternative to fibre-optic tuned gyros. The performance is achieved by a new MEMS ring design in Silicon Sensing’s VSG3 technology, ensuring high shock and...
First Sensor presents a new technology platform to fabricate high precision MEMS inertial sensors for the detection of inclination, acceleration and vibration. The capacitive sensors are based on single crystal silicon and utilize the latest...
Advanced Sensors Calibration (ASC): Based on its recent analysis of the rail acceleration and rotation rate sensors market, Frost & Sullivan recognizes Advanced Sensors Calibration (ASC) GmbH with the 2014 European Frost & Sullivan Company...
ETLG Inertial Aerosystems has launched two new Micro Electro-Mechanical System (MEMS) Accelerometers in the UK. Its analogue and digital variants are suitable for a wide range of deployments. Their supplier is pleased to have achieved high...
ETLG Inertial Aerosystems have released a youtube video describing the major technical parameters to consider when selecting a gyroscope. All gyroscope types are graphically described and compared for performance and cost. The video is produced by...
Sensonor: The STIM210 will support systems stabilization to mitigate effects of wave motion for a ‘remote controlled’ variant of the SIMBAD twin launcher system, equipped with two ready-to-fire Mistral missiles. The system developed by MBDA...
Sensonor: STIM210 is an established and reliable high precision 3 axis gyro module. It is suitable for pointing and stabilization, flight control and guidance applications in the Industrial, Aerospace and Defense markets.
Sensonor: STIM300 is a small, lightweight and low power ITAR free high performance Inertial Measurement Unit (IMU). In addition to being non-GPS aided and insensitive to magnetic fields, it offers compared to existing solutions;
Sensonor STIM300 Inertia Measurement Unit: It is the smallest, lightest and highest performing non-GPS-aided commercial MEMS IMU in the market. NEW feature for real-time g-compensation in all axis. NEW rates supported up to 2000 deg/second. The...
LORD MicroStrain Sensing Systems has introduced the 3DM-GX4® family of miniature 10°/hour inertial sensors, utilizing high-performance MEMS sensor technology. The 3DM-GX4-15 Inertial Measurement Unit (IMU) and 3DM-GX4-25 Attitude Heading...
Sensonor: Unmanned aerial vehicles or UAV's has now reached critical momentum, and we are seeing a major commercialization of many projects and applications. Size, performance and robustness are key success factors in the UAV segment. ...
Sherborne Sensors presents the T835 Series, a high precision, gravity referenced, tri-axial inclinometer, designed for application in physically challenging and space constrained environments. Available in angular ranges ±14.5° to ±60° and...
Sensonor gyro announced as "The world’s highest performance silicon MEMS gyro module" by the recognized System Plus Consulting reverse engineering company. System Plus Consulting, a close partner of the MEMS expert Yole Développement has...
Sherborne Sensors presents the T333 Series gravity referenced, tri-axial linear servo inclinometer. Derived from Sherborne Sensors’ extremely successful T233 Series of dual axis inclinometers, the T333 is the next evolution of products...
Sherborne Sensors has re-launched its DSIC digital servo inclinometers due to continued demand from its customers and the wider market. The DSIC Series is a range of single and dual axis gravity referenced digital output servo inclinometers with...
Sherborne Sensors presents the T820 series, a new range of high precision, gravity referenced dual axis inclinometers for measurements in space constrained environments such as borehole or well logging and seismic studies. Available for ranges...
Texys International is proud to announce the release of new texense® IB6-CAN: the CAN bus version of its successful IB-6 analog Inertial Movement Unit. Texense® IB6-CAN is the result of the ongoing development process on IB-6 previous release...
Sherborne Sensors has announced that its DSIC inclinometers and A323 accelerometers are being used to provide highly-accurate, geo-reference position data as part of an innovative automated mineshaft inspection technology. Based on LiDAR, (Light...
