Capteura® 200 Series Non-Contact Displacement Systems

The Capteura® 200 Series Modular non-contact capacitive displacement instrumentation packages are the next generation to the 4000 series. Introduced in 2012, the new Capteura® 200 Series offers Capacitec’s highest stability and lowest noise solution for displacement measurements when used in conjunction with any of Capacitec line of non-contact displacement, gap and hole sensors.
The Capteura® 200 Series rack system combines two amplifiers onto each card allowing it to be twice as dense as most systems. Its small size requires a smaller rack enclosure. The rack system can accept up to eight 220 amplifier cards for up to 16 channels, with either 105-240VAC or 9-36VDC (208-DCU and 216-DCU) power input.

The Capteura® 200 Series is available in three different form factors. The 208 rack holds up to 8 channels; the 216 rack holds up to 16 channels and the stand-alone 200-EC single card enclosure allows for 1 dual channel card to be used in a dedicated aluminum enclosure. The rear panel of the 208 and 216 rack provides one BNC female connector for each primary analog output in single-ended mode plus a 24-pin D-Sub having an additional analog output connector offering differential analog output options.

Capteura® 520 Series

The Capteura® 520 Series non-contact displacement, gap and parallelism amplifier is the newest addition to the Capacitec Capteura® Modular non-contact capacitive displacement instrumentation packages and are the next generation and replacement for the super-linear 5100 series. Introduced in 2013, the new Capteura® 520 Series continues to offer Capacitec’s super-linear, and now additionally super stable and lowest noise solution for displacement measurements when used in conjunction with any of the Capacitec line of sensors.

Capteura® 520 Series provides the latest state-of-the-art electronics while offering significant added value to meet customers specific requirements with performance features such as:

• A higher performance 520-XL Dual Amplifier Card with new very small 2U, 55.5 (H) X 100mm (L) size
• The new 208 and 216 electronic racks are three times smaller that the previous generation (double the density of even the existing Capacitec mini modular 4000 series).
• Easy push button calibration
• ESD protected inputs
• 0.05% accuracy
• Better than 65,000:1 resolution (38nm) with HPC-150E-A-L2-1-B sensor, 200Hz bandwidth and 2.5mm range (double the range of competitive systems)
• Customer selectable frequencies, 200Hz, 4kHz or 16kHz
• Cable length changes of ≤10’ (3.05m) results in <0.2% change in output
• Differential analog output (standard) and USB analog to digital converter (optional).