Leuze electronic: Leuze is expanding its product portfolio with LiDAR technology: New ROD 300 series of laser scanners for efficient contour measurement and ROD 500 for precise AGV navigation. Whether on the conveyor belt or on the automated...
Micro-Epsilon: Measuring complex geometries with laser scanners used to be a major challenge. With the 3D Profile Unit, Micro-Epsilon has now developed a solution which can organize several scanners into a common coordinate system. This makes it...
RIFTEK: The tube sheet is an essential component of heat exchangers and is usually a round plate with many (up to several thousand) holes. One of the most important indicators of the tube sheets quality is compliance of the diameter of all holes with the...
RIFTEK: We want to share information about an important event in the life of the company. We are completing the first stage of one of our largest projects, namely the production and delivery of three 3DWheel systems for the Sao Paulo metro. 4.5 tons of...
RIFTEK: We continue to improve our products and do everything possible to make working with complex devices and systems more comfortable for the user. For this purpose, we have developed a special protocol for communicating with RF62x series scanners and...
RIFTEK: The uniformity of the thickness of the rubber sheet used in production of car tires is an important indicator for obtaining a quality end product. The developed system solves the task of real time rubber thickness monitoring. The system is placed...
RIFTEK: Our new system is designed for thickness control of various sheet materials (metals, plastics, wood). We implemented a classic measurement scheme based on two triangulation sensors, placed on C-frame on opposite sides of the controlled sheet. The...
RIFTEK: The efforts of our specialists to improve RIFTEK products have been successful and we are pleased to offer an updated line of 2D laser scanners. Now, in addition to the popular RF627Smart scanner, we offer four new models:
Micro-Epsilon: Laser sensors from the optoNCDT 1900 series are used to 100% inspect the radial and lateral runout of tires for cars and aircraft before they are fitted. Two sensors measure perpendicular to the tires to be tested. The sensor...
Leuze electronic: Small housing, big operating range: Thanks to TOF technology, the new ODT3CL1-2M compact diffuse sensor from Leuze achieves an operating range of up to two meters. The 2-in-1 sensor detects the presence of objects and at the same...
Micro-Epsilon: The performance of the scanCONTROL 3000 scanners has been increased: improved algorithms and components accelerate data acquisition and output to up to 10 million measuring points per second. The profile calculation and evaluation...
Micro-Epsilon: All scanCONTROL laser scanners from Micro-Epsilon are now compatible with Cognex VisionPro via the AIK adapter. This provides more flexibility and easier connectivity options. The AIK adapter combines the advantages of the Cognex...
Leuze electronic: The AMS 100i from Leuze is one of the smallest laser positioning systems available on the market. This makes it the perfect solution for tight installation spaces. Whether on the stacker crane, automated guided vehicle, or...
Micro-Epsilon: A powerful computer unit is now available for Micro-Epsilon's 3D sensor portfolio in the form of the Industrial Performance Unit (IPU). The system consists of a powerful industrial controller and the 3DInspect evaluation software...
Micro-Epsilon: The dimensional accuracy of sheet metal can be checked using a Dimensionics measuring table equipped with precise laser profile sensors from Micro-Epsilon. In an automated process, the sensors check the width, length, angle,...
Micro-Epsilon: The scanCONTROL 3000 laser scanners are now even more versatile. As a rear-tail version, they have a rear cable outlet including integrated cable. This reduces the space required to install the scanner by half. In addition, a new...
Micro-Epsilon: For the 3D measurement of suspension springs, Qsigma GmbH has developed the precise Spring Measurement System. With this system, springs with different properties can be tested in a very short time. For this purpose, scanCONTROL...
Micro-Epsilon’s scanCONTROL 30xx laser profile scanners now offer a 5 times higher performance based on the new firmware V53. The exposure time has been optimized which enables significantly faster 2D/3D profile measurements.
Micro-Epsilon: Foam cutting machines must ensure a constant cutting quality, which requires among other things a perfect condition of the cutting blades. Laser profile scanners from Micro-Epsilon are used to test the knife sharpness. Foam cutting...
RIFTEK: Turn-key solution on the base of 2D laser scanners and point triangulation sensors for continuous contactless measurement of gypsum boards geometrical parameters. Measured parameters: Full profile of any type shape edge with two adjacent surfaces...
RIFTEK: Our new finished project continues RIFTEK’s work in solving different measurement challenges and is intended for non-contact measurement of gypsum boards during their production. 3DGipsumB system contains 3 measurement stations, sequentially...
RIFTEK: Our new finished project continues RIFTEK’s work in solving different measurement challenges and is intended for non-contact measurement of gypsum boards during their production. 3DGipsumB system contains 3 measurement stations, sequentially...
RIFTEK: Our development team constantly communicates directly with customers and partners. This feedback is very important to us and we try to satisfy and anticipate customer’s requirements for our devices as much as possible. Exactly because of this...
RIFTEK: The kit is designed for non-contact laser scanning of objects in order to obtain a three-dimensional model and generate files suitable for further use in CNC machines. The kit includes a laser sensor, a synchronization module and a software package...
Micro-Epsilon: Laser scanners from Micro-Epsilon are used for the geological analysis of drill core and mineral samples. With its special x-ray analysis equpiment (XRF scanners), the company Cox Analytical Systems relies on the sensor technology...
Pilz GmbH & Co. KG: Additional digital inputs and outputs are now available for the safety laser scanner PSENscan: Up to 70 switchable configurations can now be implemented and up to three separate safety zones can be monitored simultaneously...
Micro-Epsilon: The thicknessGAUGE system measures the thickness of strip and plate materials reliably and with the highest precision. Depending on the measurement task, different variants with different sensor technologies are available. In...
Micro-Epsilon: The new scanCONTROL 30xx laser scanners from Micro-Epsilon now offer large measuring ranges up to 200 mm. The high performance scanners are used for 2D/3D profile measurements in industrial production processes. Precision and high...
Micro-Epsilon: In order to detect free forms and form deviations before the laser processing stage, a scanCONTROL laser scanner from Micro-Epsilon scans the corresponding components. If required by the component geometry, this is done from several...
RIFTEK: These projects continue our work in solving widespread ID measurement challenges. Operation of the device is based on the scanning of the tube inner surface by rotating laser head. The gauge operates as follows: the operator inserts the laser head...
