![Triaxial Force Sensors Measure Off-Highway Vehicle Dynamics](https://sens2b-sensors.com/media/zoo/images/pcb-y6m7d20_a53d9253867e535ff9b879c4bb2672d1.gif)
Triaxial Force Sensors Measure Off-Highway Vehicle Dynamics
July 20, 2006, Depew, New York, USA – Series 260A Triaxial Piezoelectric Force Sensors from the Force/Torque Division of PCB® Piezotronics, Inc., available in ICP® and charge output versions, simultaneously measure dynamic and quasi-static forces in three orthogonal directions (X, Y, and Z-axes). The sensors are used to study large, off-highway vehicle chassis dynamics at interfaces between shock absorbers, struts, hydraulic actuators or other chassis components, such as those typically found on dump trucks, payloaders, backhoes, and bulldozers.
Triaxial force sensors supplement vibration measurements in vehicle testing by providing the input force that drives the dynamic response, for example, from the motor mounts or hydraulic actuator to the rest of the vehicle. Testing includes modal analysis, durability and fatigue life, and ride quality studies. Series 260A sensors feature full-scale measuring ranges from 500 lb to 4,000 lb (2.2 kN to 18 kN) in X and Y directions, and from 1,000 lb to 10,000 lb (4.5 kN to 45 kN) in the Z direction. Single axis models are also available.
For additional information, contact the Force/Torque Division of PCB Piezotronics, Inc. on +001 716 684 0001; e-mail: force@pcb.com, fax on +001 716 684 8877, or visit PCB's web site at www.pcb.com.
# # #
PCB and ICP are registered trademarks of PCB Group, Inc.