Kistler: With the measuring pin sensors Type 9243B, 9245B and 9247A, Kistler offers the ideal solution for measuring the cavity pressure for parts with very stringent optical and finish requirements. These sensors are placed behind the wall of the...
PCB Piezotronics, Inc.: Series 103B ICP® Acoustic Pressure Sensors from the Pressure Division of PCB Piezotronics, Inc. measure pulsating, transient, and...
PCB Piezotronics, Inc.:High-frequency sensors from the Pressure Division of PCB® Piezotronics, Inc. are designed for a broad range of explosion, blast, and shock wave testing....
Sensortechnics’ KTE6000CS series offers level measurement for ranges from 2.5 m water column (250 mbar) Full Scale. KTE6000CS hydrostatic pressure transmitters consist of highly accurate and long-term stable pressure sensor elements. The sensor is enclosed in a...
Kistler The Kistler Type 6052C... has again undergone further improvements and is an excellent all-rounder for multi-valve-engines, motorcycle-engines and other small engines, and for on-board indication. This sensor...
Kistler: The M5-size piezoresistive pressure sensor Type 4005A... is designed for measuring absolute pressure in engines. A so-called DCE sensor (DCE = Direct Chip Exposure), it does not have a steel diaphragm for separating media, but is exposed...
Kistler: The Kistler Type 2621E… system is used for temperature conditioning of water-cooled pressure sensors and ensures constant thermal conditions in the measuring element – irrespective of the varying operating conditions of the combustion...
Kistler: Sensors for measuring the temperature of the molded component are used in addition to mold cavity pressure sensors. Mold cavity pressure already reveals correlations of up to 95 % with the molded part characteristics. This can be...
Sensortechnics presents the HPX series from Honeywell for accurate low-cost gage or absolute pressure measurement from 300 mmHg to 100 psi (400 mbar to 7 bar). These uncompensated, un-calibrated basic sensors deliver...
Sensortechnics presents a new family of Electronic Pressure Controllers (EPC's) from Parker Hannifin Corporation, Pneutronics Division. EPC's are precision electronic devices which maintain a pneumatic process...
Sensortechnics’ KTE3000 series is ideally suited for use with corrosive and aggressive liquids and gases. The media wetted housing material is manufactured from a highly chemical resistant PPS plastic (Polyphenylensulfide). The transmitters are...
