MDB Bearing Temperature Sensor

4B BRAIME Components LTD: The MDB series is a range of bearing sensors manufactured to screw directly into a bearing housing through the existing 1/4” BSP threaded grease zerk (can be installed in 1/8” NPT grease zerk fitting with an adapter). Each sensor is fitted with a grease zerk to allow lubrication of the bearing without the need for removal of the sensor. The sensor is fitted with a M12 connector for use with a separately supplied cable and socket assembly which can be attached connected directly to a PLC or to a hazard monitoring system, such as 4B’s T500 Hotbus Elite, Watchdog Elite, or T400 Elite. The connections are not polarity sensitive therefore special connection requirements are eliminated. Four versions are available, a NTC thermistor model or PT100 type for continuous temperature monitoring, and PTC or Contact thermistor models with five trip points (50°C, 60°C, 70°C, 80°C, 90°C).

FEATURES

• Screw in Installation
• Grease Zerk for Bearing Lubrication
• Wiring Connector
• NTC Version – Continuous Temperature
• PTC or Contact Versions – Trip Points from 50°C to 90°C
• PT100 Version
• ATEX Zone 20 and IECEx Approved
• More information on: http://www.go4b.co.uk/uk/bearing-temperature-sensors.php