Piezoresistive

Sensortechnics’ SSO stainless steel pressure sensors accurately measure gage or absolute pressures in ranges from 200 mbar up to 35 bar. Fully welded, media isolated rugged stainless steel constructions with G 1/8 (BSP) threaded pressure ports...

Baumer’s industrial pressure transmitter PBMN achieves maximum precision in measuring both low and high pressures by using different sensors. For pressures below 60 bar, a piezo-resistive silicon sensor is used. A metal thin-film sensor ideally...

Baumer: With the PB series, Baumer is introducing a new pressure transmitter family based on a modular system which can be adjusted individually to customers’ needs. Remarkable is the high accuracy (of up to 0.1 % F.S.) over a large compensated...

Kistler: Melt pressure in front of the screw of injection molding machines is an important process parameter. Machine control is critically dependent on its precise measurement. This is because injection molding components can only be kept within...

Kistler: The use of highly-sensitive piezoelectric combustion pressure sensors with built-in ground isolation can largely avoid the effects of electrical interference. The isolation of the sensing element prevents the generation of noise currents...

Kistler: The M5 piezoresistive pressure sensor, Type 4007B..., is designed for measuring absolute pressures in engines at operating temperatures from –40 to 200 °C. As a direct chip exposure (DCE) sensor with no protective steel diaphragm it is...

Kistler: The PiezoSmart automatic sensor identification system is available not only for piezoelectric and piezoresistive pressure sensors but also for accelerometers. It is based on the IEEE 1451.4 transducer electronic data sheet (TEDS)...

Kistler: The M5-size piezoresistive pressure sensor Type 4005A... is designed for measuring absolute pressure in engines. A so-called DCE sensor (DCE = Direct Chip Exposure), it does not have a steel diaphragm for separating media, but is exposed...