Heat energy, heat quantity, heat flow

greenTEG AG: We just published a new case study which demonstrates how wall humidity and U-value measurements can be used for mold detection. Introduction: The purpose of this study is to show how the gO Measurement-System (gOMS) can be used to...

greenTEG AG: The gO Measurement Systems (gOMS) is a cloud-based, wireless system for measuring U-value, R-value, Humidity and temperature. With the gOMS, simultaneous measurements with up to 16 sensor node can be conducted and monitored in...

greenTEG AG: The gO Measurement-System is a cloud-based, wireless system for U-value, R-value, surface temperature, and humidity measurements. It allows for simultaneous measurements with up to 16 sensors and real-time remote monitoring. It is the...

greenTEG AG: Scientists at the Indian Institute of Technology Kanpur just published the results of their research about inverse models for transient wall heat flux estimation based on single and multi-point temperature measurements. They used...

greenTEG AG: We will present a solution for non-invasive continuous core body temperature measurements at the Websummit 2017 in Lisbon. Core body temperature is an important parameter when assessing the state of health of the human body....

greenTEG AG: Researchers at  ETH Zurich’s Laboratory of Thermodynamics in Emerging Technologies just published the results of their research about spontaneous self-dislodging of freezing water droplets and the role of wettability. They...

greenTEG AG: Researchers at the University of Applied Sciences and Arts Northwestern Switzerland compared measured U-values and calculated U-values of unheated basements in typical Swiss houses. They conclude that the calculated U-values are often...

greenTEG AG: Researchers from the Swiss Federal Institute of Technology developed a zero-power, bioinspired heat sink where the thermal resistance is reduced with increasing ambient temperature whereas the heat flux through the heat sink is...

greenTEG AG: Scientists at Harvard University used greenTEG’s heat flux sensors in research to improve the design of pores in building materials to efficiently temper incoming fresh air. The research has been published in Energy and...

greenTEG AG: Carlos Ziebert from the  Battery Calorimetry Lab of the Karlsruhe Institute of Technology (KIT) presented his work at the 6th International Conference on Thermal Management for EV/HEV in Berlin.

greenTEG AG: Windows play an important role in the overall insulation of a building, as they are responsible for up to 20% of heat losses during winter. Therefore, replacing poorly insulated windows with windows of the latest standard can...

greenTEG AG: Thermal scanning probe lithography (t-SPL) is a promising method in high precision manufacturing. To improve this method, researchers at ETH Zurich conducted research for a better understanding of thermally induced errors in...

greenTEG AG: In our latest case study we present the thermal characterization of footwear with heat flux measurements. Abstract: The thermal characterization of functional wear becomes more and more important. Common characterization...

greenTEG AG: We are attending the International Congress on Applications of Lasers & Electro-Optics (ICALEO®) this week in San Diego. The poster we will be presenting at ICALEO about background and temperature error management for...