Temperature monitoring

CleverIR: Exergen IRt/c sensors are small, passive devices with very high performance levels. The passive nature of the IRt/c’s results in very small repeatability and interchangeability errors, and an unprecedented long term stability....

Micro-Epsilon: The infrared thermoMETER CTM-4 pyrometers precisely detects temperatures from 0 °C to 500 °C. For this extremely fast measurement, a signal of just 90 µs is sufficient for non-contact temperature detection. This...

Exergen Global:A global technology company focused on print and advanced materials & chemicals was set to come up with a revolutionary new inkjet-based digital printing press, to once and for all close the quality gap with offset at production...

Exergen Global: For high speed printing processes, the limiting factor on the productivity of the equipment is usually ink drying time. To maximize printing speed without quality loss, it is important to be able to determine quickly when the...

Exergen Global: MICROSTEP-MIS, a state-of-the-art developer and manufacturer specialized in climate monitoring hardware and information systems has been operating in the area of environmental monitoring since 1993. In meteorological stations that...

Amphenol Advanced Sensors: Predictive Thermometry is a highly accurate, repeatable, and fastresponding method of reading temperature for patients of all age groups in a clinical setting. While traditional glass bulb thermometers take approximately...

Exergen Global announced its AutoSmart Transmitters, the first transmitter in the world capable of fully calibrating Exergen IRt/c sensors to provide unprecedented accuracy of 0.1 °F or 0.1 °C by custom calibration over a very specific...

Exergen Global: Tire temperature is of critical concern in automotive racing for two reasons: 1) Tire temperature directly affects the tire’s adhesion and wear characteristics. For example, as it takes lap after lap around an oval track, a...

Exergen Global: Applying reflective cones to IR temperature sensors for moving targets. Reflective cones are a very useful addition to IR sensors when high accuracy and reliability are important for moving process measurements whose a) surface...

Exergen Global: In high volume plastic injection molding machinery, a molded part that does not clear the mold can cause serious problems, including a long down time to clean up or make repairs. A particularly useful property of the mold is its...

Exergen Global: Thermoforming is one of the oldest and most common methods of processing plastic materials. Vacuum formed products are all around us and play a major part in our daily lives. The process involves heating a plastic sheet until it is...

Exergen Global: In many IRt/c installations, such as paint curing, web drying, printing, etc., the temperature control system must be able to accurately measure materials with a variety of colors. Ideally the same calibration set-up would be used...

4B BRAIME Components LTD: The Milli-Temp series can be used on any application where bearing temperature monitoring is needed.  The Milli-Temp is a loop powered analogue sensor with a 4-20 mA linear output that is scaled across a temperature...

Exergen Global: Help Your Customers Increase Safety, Reliability & Speed with Exergen’s IR Sensors. For processes such as diagnostic procedures, skin treatments and medical interventions where blood or saline solutions are involved,...