SONOTEC: From November 14 to 17, 2022, SONOTEC exhibits at Compamed, the leading trade fair for state-of-the-art medical technology, in Düsseldorf, Germany. The ultrasound specialist presents the latest generation of the SONOFLOW® CO.56...
SONOTEC: From September 11 - 13, 2024, ultrasonic specialist SONOTEC presents its cutting-edge medical sensors for the first time at the joint booth of IVAM at Medical Manufacturing Asia in Singapore, Marina Bay Sands Convention Center. SONOTEC is...
SONOTEC: COMPAMED, the leading trade show for state-of-the-art medical technology, opens its doors from November 13 to 16, 2023 in Düsseldorf, Germany. For over 10 years, SONOTEC has been exhibiting at COMPAMED presenting its broad...
SONOTEC: In 1991, shortly after the German reunification, physicists Dr Santer zur Horst-Meyer and Hans-Joachim Münch set up their own business. The beginnings of SONOTEC GmbH were adventurous and the „Treuhand“ trust agency...
SONOTEC: With a non-contact handshake, the two managing directors Michael Münch and Thomas Riedel have sealed the partnership between SONOTEC GmbH from Halle (Saale) and S3 Alliance GmbH from Kirchentellinsfurt. The application specialist for...
SONOTEC: As the semiconductor industry is characterized by a number of liquid flow processes in which different abrasive, adherent, corrosive and ultra-pure liquids are applied, it is of utmost importance to keep these processes safe, stable, and...
SONOTEC® holds a world leading position in ultrasonic-based solutions for liquid flow monitoring on flexible and rigid tube systems. In the strict quality management of the semiconductor industry, companies increasingly ask for options to...
SONOTEC: The new SEMIFLOW Ex1 Set opens a new product category of intrinsically safe ultrasonic flow sensors with control gear for non-contact liquid flow measurement on small and midsize rigid plastic tubes to ensure safe operation in hazardous...
Baumer: The new miniature ultrasonic sensor generation SONUS with its great performance is in the focus of general interest for good reason. SONUS, currently the most compact ultrasonic sensors on the market, excel with their tiny housing of just...
Microtech Gefell: The sound intensity probe SIS 190 double allows a simultaneous sound intensity measurement in a very large frequency range. For this purpose an arrangement of one one-dimensional 1/2" sound intensity probe and one one-dimensional...
Scaime New SP1 String Pot is compact, economical and a durable device that is extremely easy-to-install and has four measurement ranges: 120, 317, 635, 1 270 mm. The SP1 is also resistant to “free release” of the cable without damage, a...
Bronkhorst High-Tech BV: By means of the innovative mounting concept FLOW-SMS a variety of components for mass flow and pressure measurement and control can be assembled to constitute a very compact gas delivery system. On a...
Baumer launches the new CFDK 25 capacitive sensor for the reliable detection of liquid levels in confined spaces. The sensor is characterized by its very flat housing and versatile mounting options. It detects liquids through container materials....
Baumer launches the new CFDK 25 capacitive sensor for the reliable detection of arbitrary objects in confined spaces. The sensor is characterized by its very flat housing and versatile mounting options. The very flat housing design with a height...
MEGATRON: It could hardly be thinner: the HSM14F Hall-effect single-turn encoder from MEGATRON has an extremely compact design, with a housing depth of just 6.2 mm. Other outstanding features are its high resolution and long bearing life. With the...
Sparton Corporation: Sparton Navigation and Exploration, a business unit of Sparton Corporation, released its improved gyro enhanced attitude and heading measurement system, the GEDC-6E, and the enhanced tilt attitude heading system, the DC-4E....
Leuze electronic: For the Leuze electronic Safety Hinge Switch of the S400 series, a new model S410 with wider fork dimensions is now available. The S400 series was extended in order to simplify the installation further, especially for greater...
HBM Test and Measurement (HBM) expands its range of strain gauges with the KFU series, which can be used at extremely high temperatures up to +350 °C. The KFU strain gauges are shipped with 1 m long cables and are protected against high...
Leuze electronic: Sensors must continuously and reliably detect a wide range of products and films on the conveyor belts of primary and secondary packaging machines for confectionery and baked goods (HFFS, FS, Thermoform, or VFFS). The packaging...
Kaman Precision Products: It takes an extremely durable design to make reliable measurements in extreme conditions. Extreme environment position/displacement sensors perform where most sensors cannot survive. These sensors are designed to operate...
Baumer: With the specially developed IP 65/67 and IP 69K housing accessories, Baumer CX.I cameras can now be used to cover applications in the food, beverage and pharmaceutical industries, which set high standards regarding cleaning media or surface...
Micro-Epsilon presents a further technological development of the colorCONTROL ACS7000 online color measurement system that is ideally suited to quality assurance in the production of film strips, eyeglass lenses, glass sheets, LEDs and...
HBM: Spectris plc, the productivity-enhancing instrumentation and controls company, announces that it has completed the acquisition of the LDS Test & Measurement business from SPX Corporation for $86 million on a debt and cash-free basis. The...
Micro-Epsilon: For the continuous colour control in the production line a colour measurement system has been developed by Micro-Epsilon. The new system does not only recognise the saved colours according to the yes-no-principle but also determines...
Manner sensor telemetry: MANNER offers the new laser sensor for convenient speed measurement with a detection range of up to 50 mm. The laser sensors from MANNER offer a high resolution with up to 0.4 mm pulse spacing and are therefore a...
Pilz GmbH & Co. KG: From Version 3.0, the speed monitor PNOZ s30 from the safety relay PNOZsigma product group has a new feature: a configurable analogue output, which makes diagnostics more user-friendly. PNOZ s 30 from Pilz safely monitors...
Exergen Global: Exergen IRt/c™ non-contact temperature sensors can push production line performance to record highs and give an instant boost in start-up speed. Dr. Pompei has derived a mathematical model to describe the thermal processes...
Exergen Global: For high speed printing processes, the limiting factor on the productivity of the equipment is usually ink drying time. To maximize printing speed without quality loss, it is important to be able to determine quickly when the...
4B BRAIME Components LTD: 4B Braime Elevator Components Ltd., a worldwide manufacturer of material handling and electronic components for bucket elevators and conveyors, has developed a new maintenance tool that makes the testing of 4B speed...
Spektra Dresden: DTC, a leading provider of complete measurement solutions for autonomous driving and ADAS testing, and SPEKTRA, a DAkkS-accredited calibration laboratory, have started a cooperation to simplify and accelerate the calibration...
