Hans Turck GmbH & Co. KG

Condition Monitoring for OEM Control Cabinets

Turck is expanding its series of cabinet guards with the addition of the IM18-CCM. The integrated sensors of the narrow 18 mm device monitor temperature, air humidity and door distance, in order to send this information via Ethernet to higher-level IT...

2020-08-04

Condition Monitoring Platform Extended

Turck's IM18-CCM60 is another particularly user-friendly addition to Turck's condition monitoring platform for the condition monitoring of control cabinets. While the IM18-CCM40 and -CCM50 models with the Debian Linux system primarily offer OEMs a...

2023-04-11

Condition Monitoring Sensor with IO-Link

Turck's CMTH combined humidity and temperature sensor is now available in a compact variant with improved IIoT integration for smart condition monitoring applications. With a length of only 57 mm and an operating temperature range from -40 to +100...

2022-07-01

Contactless Angle Sensor for Ex Areas

Turck's Ri-DSU35 is the first contactless inductive angle sensor that also has ATEX and IEC-Ex approval for use in zones 1 and 21. Compared to dual sensors, the Ri-DSU35 offers considerable benefits for the position measurement of valves and stop...

2016-11-10

Contactless QR24 Encoder Speaks CANopen

Turck has added a variant with a CANopen interface to its QR24 encoder series. The new wear-free QR24-CAN variant is ideally equipped for use in mobile machines and industrial applications. Short latency times as well as a cyclical and...

2015-05-06

Control cabinet guard with Multiprotocol support

Turck is expanding its portfolio of condition monitoring solutions with the IM18-CCM45, a control cabinet guard featuring integrated sensors and direct Multiprotocol Ethernet connectivity. Unlike previous solutions, which required discrete...

2026-09-14

Cost-effective inclination switch

Turck: The B1N180V-QR20 inclination switch expands TURCK's QR20 portfolio with a cost-effective solution for simple switching applications. The single-axis sensor uses MEMS acceleration measurement and offers a fixed switching window over 180...

2026-03-12

Decentralized I/O Solutions for the Ex area

Turck has approved its IP67 block I/O modules for the TBEN-S and TBEN-L versions for use in Zone 2. The automation specialist is thus the first supplier to enable cabinet-free decentralized automation solutions with ATEX and IEC Ex approval, and...

2021-12-14

Dirk Wunder Takes Over Corporate Marketing ...

Turck: Dirk Wunder will be responsible for Corporate Marketing at the Turck automation specialists from September 1, 2019. The industry expert will take over the position of managing director Christian Wolf, who has so far covered this area in...

2019-09-02

Dynamic Inclinometers with CANopen

Turck is now also offering its QR20 inclinometers with a CANopen interface, thus expanding the existing range with IO-Link, switching and analog outputs. The new CANopen inclinometers with their large power supply range from 8 to 36 VDC and the E1...

2024-10-30

Dynamic Inclinometers with Switching Output

Turck's QR20 inclinometer generates its signal from the combination of two measuring principles: a gyroscope signal and an MEMS acceleration measurement (Micro-Electro-Mechanical Systems). In this way the sensors combine the benefits of both...

2023-02-06

Efficient Condition Monitoring for Cabinets ...

Turck is shows an entirely new device class at the Hannover Messe: The cabinet guard IMX12-CCM (Cabinet Condition Monitoring). The new multifunctional device has already been presented as a study at the Achema and will be available ex stock from...

2016-04-11

Efficient Control Cabinet Monitoring

Turck: At the Achema fair, Turck is presenting the IMX18-CCM (Cabinet Condition Monitoring) cabinet guard, a new multi-function device which can be installed and also retrofitted in virtually any control cabinet or box in order to continuously...

2015-06-08

Electronic Fuse with IO-Link

Turck: The TBIF series from TURCK is an intelligent, electronic fuse in a robust IP67 housing for 24VDC power supply in the field. It selectively protects loads up to 4 A and enables fuse protection from 16 to 4 A for modular machine concepts...

2026-02-12

Encoder with Fixed Pulse Rate

Turck is expanding its portfolio of inductive encoders by adding the INCR variant with fixed pulse rate to the QR24 series. This allows the user to directly order the exact resolution required for their application ex works, regardless of whether...

2016-11-16

Encoder with User-Definable Pulse Counting

Turck is now offering the incremental variant of its QR24 contactless encoder with pulse rates that can be defined by the customer. The user simply sets the number of pulses per revolution between 1 and 5,000 via the Pactware parameterization...

2015-04-24

Encoders with an SAE J1939 Interface

Turck has extended its comprehensive encoder portfolio with new encoders featuring the SAE J1939 interface, which is particularly used in mobile equipment. The encoders are now available in Turck's Industrial and Efficiency Line as single or...

2021-09-24

Energy Measurement Module for BL20 I/O System

Turck is expanding its BL20 I/O system with 3-phase energy measurement modules for 1 A and 5 A current transformers to create a comprehensive energy management solution. The modules enable continuous monitoring of the energy consumption of...

2024-04-18

Eplan Data for Turck Fieldbus Technology

Turck has recently published electronic construction data on the Eplan data portal for its most important product series for fieldbus and interface technology. This consists of 105 data sets of the TBEN-L and TBEN-S modular block I/O series as...

2018-05-31

EtherCAT Block I/O with Eight IO-Link Masters

Turck has added the TBEC-LL-8IOL EtherCAT IO-Link master in IP67/69K to its IO-Link portfolio so that it can also be used for EtherCAT-based applications. The block I/O module in the robust TBEN-L housing offers eight IO-Link master ports, with four Class A...

2021-10-22

Ethernet Communication for Ex Areas

Turck is opening the world of the process industry for digitalization and Industry 4.0 with the first Zone 2 Ethernet gateway for the excom I/O system. All process data can thus now for the first time reach IT systems for analysis and evaluation at...

2020-04-02

Ethernet Gateway for Remote I/O excom

Turck's new GEN-N Ethernet multiprotocol gateway makes its excom remote I/O system fit for Industrial Ethernet networks. The gateway makes it possible to integrate the excom system in higher-level Ethernet networks with the Profinet, Ethernet/IP...

2019-11-15

Ethernet Multiprotocol Now Also with CC-Link

Turck's multiprotocol Ethernet technology now also supports CC-Link IE Field Basic. Devices with this standard operate in networks with Profinet, Ethernet/IP, Modbus TCP or CC-Link IE Field Basic without the need for manual adaption. The extension...

2024-08-15

Ethernet Safety I/O Modules in IP67

Turck is expanding its portfolio of safety I/O components with the TBPN and TBIP block I/O modules for Profisafe and CIP Safety respectively. The robust IP67 modules provide safety input and output signals directly from the field to the safety controller....

2020-07-01

Ethernet Spanner Connects Production Lines ...

Turck's TBEN-LG-EN1 spanner is a block I/O module that enables communication between two different Ethernet networks directly in the field. The robust module with protection to IP65/IP67/IP69K features a glass fiber reinforced housing and fully...

2017-11-08

Ethernet-Block-I/O with Eight IO-Link Masters

Turck's IO-Link portfolio has been further expanded with the TBEN-L-8IOL multiprotocol IO-Link master with protection to IP67 and IP69K. The Ethernet block I/O module offers eight IO-Link master ports in the robust TBEN-L housing. The module...

2016-11-08

Factor 1 Sensor for Logistics Applications

Turck is expanding the proven uprox series with the NI40UE-QV40 inductive proximity switch. This is a rectangular Efficiency Line variant that has been optimized with a focus on flexibility, short commissioning times and price-sensitive...

2021-12-14

Factor 1 Sensor for the Food and Beverage ...

Turck is presenting a new Q130WD uprox sensor with wash-down features. Compliant with the requirements of the food and beverage industry, the rectangular proximity switch offers the highest degrees of protection (IP68/IP69K) and can be used at...

2019-03-15

Factor 1 Sensors in a Plastic Threaded Barrel

Turck: Inductive sensors in a plastic threaded barrel design and an antivalent output have been added to Turck's uprox series of factor 1 sensors that offer the same large switching distance to all metals. The new sensors combine the benefits of a...

2018-11-09

Factor 1 Sensors of the Third Generation

Turck is presenting uprox3 as the third generation of its range of uprox factor 1 sensor, which has the same switching distance for all metals. The electronic platform of the uprox3 Series has been completely redeveloped, and is a world first in...

2015-05-18

<< < 1 [2] 3 4 5 6 > >>