Turck is expanding its TBEN-L Ethernet I/O family to include modules for the drive control of roller conveyor modules. The compact TBEN-LL-4RMC controls up to four RollerDrive EC5000 48 motors from Interroll with the special feature that 48 V motors can...
Turck is presenting the IM18-4DI compact, four-channel isolating switching amplifier for non-Ex areas and IMX18-4DI for Ex areas. With four signals on an 18 millimeter module width, the devices offer a high channel density that can make a...
Turck has added the TBEN-L-8IOLA class A IO-Link master to its IO-Link portfolio. The Ethernet block I/O module with the robust TBEN-L housing provides eight class A IO-Link master ports. Class A ports are preferred for connecting smart sensors...
Turck has added the FS101 flow sensor to its FS+ fluid sensor family. The new FS+ devices have the same look and feel and are therefore just as easy to run and commission as all other sensors in the family. The four-digit 12 segment display on the...
Turck is presenting new optocouplers for transmitting fieldbus communication via fiber optic cable (FOC). The single or dual-channel devices of the FOC series transfer fieldbus protocols such as Profibus-DP or Modbus RTU as light signals along...
Turck has added the IMX12-FI frequency transducer to its range of IMX interface devices. Users can not only use the devices as rotational speed monitors but also as pulse counters. In both modes, the single-channel and two-channel variants can...
Turck is presenting HART modules for its excom I/O system with fully galvanically isolated channels. This prevents therefore any potential transfers and the resulting corruption of measured values. The temperature resistant HART modules for inputs...
Turck is presenting HART modules for its excom I/O system with fully galvanically isolated channels. This prevents therefore any potential transfers and the resulting corruption of measured values. The temperature resistant HART modules for inputs...
Turck: After many years of successful work, Guido Frohnhaus will at his own request resign from his management position in the Turck Holding GmbH and Werner Turck GmbH & Co. KG and leave the Turck Group at the end of February, 2019. A...
Turck: Turck optimizes the grips of its two TX and TE connectivity series. A new hexagon nut has now been integrated in the knurled grip of the connectors. The improved wrench contact surface simplifies the secure tightening of the plug connectors...
Turck: In its new generation of inclinometers Turck has combined accelerometer technology (MEMS) with gyroscope technology so that shocks and vibration can be masked out much more effectively than with conventional signal filters. The B1NF and...
Turck is expanding its encoder portfolio to include encoders with a Profinet interface for real-time applications, particularly in the logistics, food & beverage and machine building sectors. The REM (multiturn) and RES (single-turn) series...
Turck - At the Hannover Messe Turck is showcasing a new HMI series: the TX500 HMI PLCs with high-end touch displays and fast processors are ideal for use in small to medium-size machines which have processes that have to be controlled, operated...
Turck is expanding its extensive IO-Link portfolio with new Class A and Class B I/O hubs with protection to IP67 and HF RFID read/write heads with threaded barrels designs. Thanks to SIDI, the Simple IO-Link Device Integration, the new IO-Link...
Turck is presenting the TBPN safety block I/O module, which is the first module to combine both standard and safety inputs/outputs in a single device. The IP67 hybrid modules can be adapted flexibly to the specific signal requirement in the...
Turck's TBIP offers another hybrid safety block I/O module that combines standard and safety outputs in a single device – in this case for Ethernet/IP and CIP Safety. The TBPN model for Profinet/Profisafe is already available.
Turck is presenting at the Hannover Messe the TBEN-L5-8IOL as the first fieldbus module with Profinet S2 system redundancy. The IO-Link master with IP67 protection is the only device of its kind at present to support the Profinet redundancy...
Turck: The FW 1.6.0 firmware update for Turck's GEN-3G and GEN-N Ethernet gateways for the excom I/O system improves the IIoT capabilities and simplifies system maintenance as well as commissioning. HCiR (Hot Configuration in Run) now also allows...
Turck has upgraded the power supply modules of its excom high availability system with two variants for IIoT data. The PSM24-3G.1 supplies power to excom systems in Zone 2/22 while the PSM24-N.1 supplies power to excom systems in the safe area (N...
Turck is expanding its pick-to-light portfolio with the K50 Flat illuminated touch button from Banner Engineering, its optical sensor partners. Due to its low height of 17 mm, the robust IP69K button is ideal for use in restricted mounting...
Turck: Turck's IMX12 interface series is now suitable for worldwide use thanks to new international approvals. Besides ATEX for Europe, NEPSI for China, Inmetro for Brazil (currently only DI) and IEC-Ex as a worldwide reference standard, the...
Turck is adding new devices with an analog output to its existing portfolio of QR20 inclinometers with IO-Link or a switching output. The new sensors are also available as single-axis devices for static (B1N) or moving applications (B1NF) as well...
Turck is offering inductive proximity sensors in compact designs with the BI series EH03, EG04, EH04K and EG05K, which have now been completely updated. With their reduced lengths of 22 to 15 mm, the new models are even better suited for use in...
Turck is expanding its sensor range with inductive measuring sensors with IO-Link and an analog output for flush and non-flush mounting. Thanks to the integrated microprocessor, the BI11-CK40 and NI11-CK40 models offer significantly improved...
Turck: Besides offering flush inductive measuring sensors with an IO-Link output, Turck is now also offering three non-flush variants. The NI4-M12, NI7-M18 and NI12-M30 models supply a signal proportional to distance over a 12 millimeter range as...
Turck: Inductive safety sensors with two OSSD (output switching signal device) outputs complete Turck's portfolio for safety technology. The proximity switches enable users to also exploit the benefits of contactless and thus wear-free position...
Turck has developed the world's first inductive sensors for detecting carbon fibers. The patent pending sensor series detects both carbon fibers as well as pressed CFRP parts. It is based on uprox technology that has been further developed...
Turck: The Chinese Internet platform International Industrial Automation News (IIANEWS) has chosen Turck as the winner of the “2020 Award of Excellence in Digital Manufacturing” innovation prize. The jury, made up of experts from different...
Turck: The IM12 interface devices now allow for the first time the benefits of Turck's IMX12 series to also be available for non-intrinsically safe signals. The IM12 devices are some of the slimmest on the market and with a width of only 6 mm per...
Turck is expanding its extensive IO-Link portfolio with a robust IO-Link master with an M12 power supply, a compact IO-Link master in IP20 and an I/O-Hub with an additional power supply. The TBEN-L-8IOL IO-Link master is now also available with an L-coded...
