3D Laser scanning kit Shtrikh-2M

RIFTEK: The kit is designed for non-contact laser scanning of objects in order to obtain a three-dimensional model and generate files suitable for further use in CNC machines.

The kit includes a laser sensor, a synchronization module and a software package and can be installed on CNC routers, milling and engraving machines with any type of control.

Specification

Principle of operation

The laser sensor is installed on the motion system of the machine. In scanningmode, the CNC system moves the sensor line by line ("snake") over the prototype of the product. The sensor measures the distance (Z coordinate) to the product surface. Data readout from the sensor is synchronized with its movement (XY coordinates), and the result is transmitted to the PC via the Ethernet port. Thus, an array of XYZ coordinates of the surface is formed, i.e. a digitized model of the prototype. This model is saved as a point cloud and also in STL format suitable for further use in CNC systems.

Main components:

Designations:

1. Laser sensor (RF603 or RF603В, in the figure - RF603В).
2. Synchronization unit.
3. Cable for connecting the laser sensor to the synchronization unit.
4. Ethernet cables for connecting the laser sensor to the PC (in the version with RF603 - one Ethernet cable).
5. USB-RS485 cable for connecting the synchronization unit to the PC.
6. Power cable 220 V.

NOTE: For the version of the kit with a binocular laser sensor (RF603B), a network switch and a patch cable are also supplied