Full bridge PWM gate-driver motor control ICs

Offering industry standard control interface for industrial and consumer applications

Allegro MicroSystems Europe has introduced a new family of full bridge gate-driver ICs designed to drive a wide range of DC brushed motors with simple logic from a microprocessor.

The new A4955/56 and A5957 devices can support motor supply voltages up to 50 V and load currents of up to 20 A. These devices are targeted for both the industrial and consumer markets in applications such as robotic vacuum cleaners, vending machines, cash dispensing machines, coffee vending machines, ticketing machines, automatic gates and turnstiles, and sewing machines.

Flexible interface options are offered in three individual products, making the devices easy to fit into customers’ existing designs with little or no firmware changes.

The A4955 offers parallel control inputs which drive the bridge in forward, reverse, brake, and standby modes; the A4956 offers phase, enable and mode inputs which drive the bridge in forward, reverse, brake and fast decay modes; while the A5957 offers phase, enable, and ‘sleep’ inputs which drive the bridge in forward or reverse modes with slow decay synchronous rectification.

Unique features of the A4955/56 and A5957 include an analogue output function which can be used to monitor current through an external sense resistor (if used). A sample-and-hold circuit is used to capture the peak voltage across the sense resistor and hold it during the ‘off’ time until the next PWM cycle begins. The voltage is amplified by a factor of ten and fed to the analogue output terminal, providing the user with the ability to accurately estimate the current in the load in real time.

Another unique feature is the programmable gate drive. An external resistor sets the magnitude of the current into the gates of the external FET bridge, allowing the user to control the slew rate of the driver to help achieve electromagnetic compliance.

Other key features include internal pulse-width modulation (PWM) current control. Peak current is regulated with a fixed ‘off’ time PWM regulator, and the peak current is selected by the voltage on the reference voltage terminal. In addition, an overcurrent flag notifies the user when the device is actively PWM limiting the current in the load.

Protection features include VDS sensing, where monitoring the VDS (drain-source voltage) of the external MOSFET provides protection in the case of bridge or motor shorts; undervoltage lockout, which eliminates the need for power sequencing; crossover current protection for driving a wide range of FETS; and thermal shutdown.

The A4955 and A4956 devices are supplied in a low-profile (4 × 4 mm) 20-contact QFN package (suffix “ES”) or a 20-lead eTSSOP (suffix “LP”), both with exposed power tab. The A5957 is only supplied in the low-profile 4 × 4 mm, 20-contact QFN package (suffix “ES) with exposed power pad.

About Allegro
Allegro MicroSystems, LLC is a leader in developing, manufacturing and marketing high-performance semiconductors. Allegro's innovative solutions serve high-growth applications within the automotive market, with additional focus on office automation, industrial, and consumer/communications solutions. Allegro is headquartered in Worcester, Massachusetts (USA) with design, applications, and sales support centers located worldwide. Further information about Allegro can be found at www.allegromicro.com

Allegro MicroSystems Europe, headquartered in Chertsey, United Kingdom, is the European sales and marketing operation, and operates a network of representatives and distributors throughout Europe.  Allegro also has an engineering design centre in Edinburgh in Scotland and an application and marketing centre in Annecy in France.