Physik Instrumente (PI): The U-264KSPA linear actuator from PI (Physik Instrumente) is a self-locking drive that has been optimized for being produced in large quantities from engineering thermoplastics. It features a 200 mm travel range and a...
Novotechnik U.S. announces the WAL300 Series of hollow-shaft angle sensors, made by our affiliate Contelec, that combines high resolution of <0.3° with low cost of $22 in quantities of 1,000. Housing diameter is 32 mm, and WAL300 Series is...
SIKO GmbH: Automated changeover – this term is as commonplace these days as PLC and electrical drives. Changeovers of the axes and spindles in production, especially for packaging, labeling, paper or wood-processing machines, are required time...
Novotechnik introduces the Vert-X 31E Series of programmable rotary angle sensors. The sensors are touchless magnetic angle sensors with a permanent magnet that can be secured to a rotating shaft, so that there is no direct mechanical linkage...
Leuze electronic is releasing new cylindrical sensors for particularly difficult conditions. The new 328 series is based on the optical platform of the well-known standard 318B series and, thanks to the metal sleeve in the housing, offers higher...
Physik Instrumente (PI): In its new catalog, PI miCos presents on over 180 pages precision positioners and motion control equipment for use in UHV environments to 10-10 hPa. Vacuum environments are required in many of today's leading edge...
Leuze electronic is currently pursuing its strategy of offering standard sensors for nearly any application at an unbeatable price-performance ratio. Three new series are proof that this is working. Due to increasing pricing pressure, users are...
Melexis: The SAE J2716 SENT (Single Edge Nibble Transmission) protocol serves safety critical, cost sensitive applications in the automotive and transportation sectors. It facilitates the replacement of analog signaling between sensors and...
Micro-Epsilon: At the end of 2012, Micro-Epsilon launched the capaNCDT 6200 capacitive measuring system that can be extended by up to four measurement channels using demodulators. A new addition is the DL 6230 demodulator, which provides up to 8...
SIKO GmbH: The KIT_MA523/1 complete set contains the new MA523/1 three-axle measurement display along with a holder, adapter and the magnetic sensors and magnetic strip that go with it. The KIT_MA523/1 is excellent for all applications in which...
Pewatron: The EH80PF hollow shaft accepts shaft sizes from 30 to 44 mm and custom bores are available. Keyed shaft, setscrew, and special clamping ring are offered as shaft mounting options. The encoder offers standard resolutions including 720,...
Baumer: EEx HOG 161 is the youngest Baumer HeavyDuty incremental encoder in explosion-proof design with IECEx certifcation in device category 2 G. The encapsulated, pressure-proof device for enhanced safety is compliant to both AT
Novotechnik: Designed for applications that require a linear position sensing device in a narrow space or tight budget, Novotechnik’s LFP Series membrane potentiometers provide some unique advantages besides a thin profile. This includes...
Physik Instrumente (PI): The new PIVeriMove simulation software from PI (Physik Instrumente) increases the operational safety of Hexapod systems. With their six degrees of freedom, PI's parallel-kinematics Hexapod systems allow for a flexible...
RIFTEK: Electronic gauge is designed for measuring back-to-back distance of railway, metro and tram wheels in the course of checkup, examination, repair and formation of wheel sets. Measurements are made directly on...
RIFTEK: The micrometers are intended for non-contact measuring and checking of diameters, gaps, displacement/position of the edges of technical objects. The series includes 3 models with the measurement range, from 5 to...
RIFTEK: The micrometers are intended for non-contact measuring and checking of diameters, gaps, displacement/position of the edges of technical objects. The series includes 5 models with the measurement range, from 10 to...
RIFTEK: The laser scanners are intended for non-contact measuring and checking of surface profile, position, displacement, dimensions, sorting and sensing of technological objects, 3D scanning. The Series is divided into...
RIFTEK: The sensors are intended for contact measuring and checking of position, displacement, dimensions, surface profile, deformation, sorting and sensing of technological objects. The series includes sensors with the...
RIFTEK: The sensors are intended for non-contact measuring and checking of position, displacement, dimensions, surface profile, deformation, vibrations, sorting and sensing of technological objects as well as for...
RIFTEK: The sensors are intended for non-contact measuring and checking of position, displacement, dimensions, surface profile, deformation, vibrations, sorting and sensing of technological objects as well as for...
RIFTEK: The sensors are intended for non-contact measuring and checking of position, displacement, dimensions, surface profile, deformation, vibrations, sorting and sensing of technological objects as well as for...
RIFTEK: The sensors are intended for non-contact measuring and checking of position, displacement, dimensions, surface profile, deformation, vibrations, sorting and sensing of technological objects as well as for...
Physik Instrumente (PI): What does it take for humans and technology to make it to the top? What is their driving force? What distinguishes a suc-cessful product from others? In its video "The Graceful Elegance of Precision", PI (Physik...
Physik Instrumente (PI): With the P-763 piezo scanner, PI (Physik Instrumente) comple-ments its product line of precision piezo-driven XY stages with clear aperture. This XY nanopositioning system with 70 mm side length features a large 30 mm x 30...
Physik Instrumente (PI): New microscopy methods, such as two-photon microscopy, make it possible to record 3D stacks with up to 1 mm depth in biological samples. For this they require high-performance drives for positioning the objectives. PI...
Physik Instrumente (PI): A linear repeatability of 20 µm, and 200 µrad in the tip/tilt or rotational axes – these are important features of the new H-820 Hexapod from PI (Physik Instrumente). The H-820 Hexapod is not as precise as the...
Physik Instrumente (PI): Cost-effective with 2 µm step size. PI (Physik Instrumente) completes its product line of high-velocity M-663 micropositioning stages. The new linear stage version M-663.5U is especially suited for positioning tasks in...
Physik Instrumente (PI): For the new LPS-65 positioning stage, PI miCos replaces conventional DC or stepper motors with a piezo stepping drive. Using the piezo stepping drive principle, the linear positioning stage features a repeatability down to...
Novotechnik U.S. introduces the Vert-X 28HD Series of non-contact angle sensors. These magnetic sensors are designed for harsh environments. They have an aluminum housing and are sealed for protection against ingress of liquids and solids to IP...
