Pewatron announces MIDORI’s new small range linear hall effect sensor LP-10HA. The model is especially suited for short stroke actuators in an environment with high vibration and dither movements. A broad temperature range of -40 up to +100°C...
Micro-Epsilon presents the new capaNCDT 6220 controller for capacitive sensors, developed for non-contact displacement, distance and position measurement, which can be enlarged by a maximum of 4 measurement channels. The additional channels can be...
Micro-Epsilon presents a new series of confocal chromatic sensors, the confocalDT IFS2405. The new sensors have a higher sensitivity and so offer significant advantages with regard to measurements carried out on dark targets. In order to ensure...
Micro-Epsilon: Embedded Coil Technology (ECT) allows the limitations normally caused by the material and design to be exceeded. This fact makes the sensors unique. Technology for the production of coils in sintered inorganic carrier material has...
SNT Sensortechnik AG: The specialist for ultrasonic sensors SNT Sensortechnik AG introduces an all new sensor generation. The ultrasonic sensors of UPR-A series in M18 size are characterized by a wide range of max. 1.5m. Furthermore they are...
Penny + Giles: With regional support from its Swedish distributor AB Elwia, Penny + Giles – a business group of Curtiss-Wright Controls and designer and manufacturer of position sensors, solenoids, and joystick controllers – has supplied its...
Contelec sets a new standard in green technology with its latest low-power angle sensors in the Vert-X 21 series. The absolute-measuring magnetic rotary encoders are rated low-power and low-voltage, combining these advantages in an ultra-precision...
Physik Instrumente (PI): The use of piezo-based tip/tilt mirror systems and ultrasonic drives from PI guarantees the precision required for the refractive correction of visual acuity. The drives are used to control and focus the laser beam. When...
Pilz has added a special tool function to the camera-based protection and measuring system PSENvip. Even with large tool shapes, it can be used to monitor the bending angle measurement on presses safely and in compliance with the standards. TÜV...
Baumer: Miniature sensor with large sensing distance: With the expansion of its inductive sensor series IFRM04/05, Baumer has achieved a perfect balance between functionality and compactness. With 1.6 mm, the inductive sensors offer the largest...
Pepperl+Fuchs: Level control in a water tank is one of the classic applications for ultrasonic sensors. A sensor in a M30 sleeve can measure heights of four or six meters without any problems. If the pump is controlled by means of a PLC, sensor...
Novotechnik U.S. announces the EasyAdapt Programming Tool for their Programmable Vert-X line of rotary angle sensors and encoders designated Vert-X MH-C2. The EasyAdapt Tool enables easy and fast programming of sensors and consists of programming...
Novotechnik: With its LFP line, the Novotechnik portfolio now also includes membrane potentiometers for linear position detection whose linearity and life expectancy closely match those of the known potentiometer standards. The traditional wiper...
Novotechnik U.S. introduces the RFC4800 Series of touchless rotary angle sensors that provide absolute, rotary position. It is available with two programmable switch outputs on the analog version. The RFC4800 Series utilizes a magnetic pickup to...
Novotechnik Messwertaufnehmer OHG: The rougher the environment, the more technology is put to the test. This, of course, also applies to the angle sensors deployed . In mobile applications, but also in industrial environments they are often...
Micronas, known and recognized in the automotive and industrial business as a global partner for intelligent, sensor-based system solutions, today announces the enlargement of its product range with the high-precision, programmable HAL 2420 and...
Metallux: It offers high robustness when exposed to vibrations and requires little space for installation. There are a lot of reasons why Metallux AG is using contact-free Hall Effect Technology in joysticks in addition to the standard Conductive...
Penny + Giles: Loughborough, UK-based Brush Traction, part of the Wabtec Rail Group, offers a complete design and installation service for repowering packages that help improve the efficiency of older diesel-electric locomotives and the...
Penny + Giles, a business group of Curtiss-Wright Controls and designer and manufacturer of high precision sensing technology, is helping gearbox specialist Geartronics to significantly improve the shift times and reliability of its motorsport...
Penny + Giles: Since its introduction in 2009, the TPS280DP throttle position sensor from Penny + Giles – a business group of Curtiss-Wright Controls and designer and manufacturer of high precision sensing technology – has become widely...
Dimetix AG: In various applications, an external measured distance value display for visually presenting a distance, length or position is absolutely essential for an operator. An external digital display can be directly connected to the DLS-C...
Pilz: At SPS/IPC/DRIVES 2012 Pilz will be underlining its claim as a solution supplier for complete automation. In Nuremberg the company will be presenting its latest innovations from the fields of sensor, control and actuator technology. The...
Micro-Epsilon has developed a new highly dynamic laser sensor for displacement measurements of shiny metal, coarse, and textured surfaces. In contrast to point-type laser models, the measuring point is extended to form a line which helps prevent...
Balluff: Binary-switching, magnetic-field sensitive, electronic cylinder switches of the BMF series from Balluff impress with precise and bounce-free switching response, simple handling and universal use. With the BMF 243, the sensor specialist...
Novotechnik introduces the LS1 Series of non-contact linear position sensors. These sensors are based on Novotechnik’s Novopad, a non-contacting inductive technology, are insensitive to magnetic fields and have no mechanical sensor track. Models...
Penny + Giles: With regional support from its Australasian distributor Control Devices, Penny + Giles – a business unit of Curtiss-Wright Controls and designer and manufacturer of position sensors, solenoids, and joystick controllers – is...
SIKO GmbH: How do you combine a hand wheel with a position indicator? The engineers at SIKO were already working on this question back in 2000. That is when SIKO GmbH came up with the DK01 control knob - a completely new type of product for the...
Baumer: With its broad sensor portfolio featuring many different technologies, Baumer is able to meet the high requirements associated with producing, processing and packaging food products. Photoelectric, inductive and ultrasonic sensors provide...
Penny + Giles, a business group of Curtiss-Wright Controls and designer and manufacturer of high precision sensing technology, is supplying its STT280 tilt sensors and SRH280DP rotary sensors to Sarclad Ltd to provide critical measurements for an...
Penny + Giles, a business group of Curtiss-Wright Controls and designer and manufacturer of joystick controllers, solenoids and high precision sensing technology, is supplying its TPS280DP throttle position sensors to UH Racing, the University of...
