Sensor technologies / Measurement principles

Inertial Labs, Inc.: Embention began investigating Inertial Labs as a supplier for inertial measurement units (IMU) or attitude and heading reference systems (AHRS) in 2013. Their developing project would involve integrating such sensors with targeted...

ASM Sensors: In many applications both displacement and inclination must be determined. Usually two different sensors need two be applied to capture both parameters, even if the variables need to be measured at the same spot of the machine. In...

Manner sensor telemetry: MANNER Sensortelemetrie offers a comprehensive portfolio for test bench, validation and efficiency analysis tasks. The further development of the MANNER measurement technology has resulted in the creation of a new...

Inertial Labs, Inc.: Aerial Photogrammetric analysis may be applied to a single image or high-speed imagery and remote sensing to detect, measure and record complex 3D motion fields. This is done by feeding measurements and image analysis into computational...

Balluff: With the BML05RP, Balluff offers a magnetically encoded displacement encoder especially for safety-related applications. It is TÜV Rheinland certified and features both an analog and a safe absolute SSI or BISS-C interface. Thanks to...

B+B Thermo-Technik GmbH: In addition to invasive and non-invasive temperature sensors, B + B also offers contactless temperature measurement. With the help of our infrared products, it is possible to record temperatures at distances. This...

Sensor Instruments GmbH: Plastics have become an integral part of our daily life. Their production consumes valuable resources; it is clear that the plastics industry needs to introduce a sustainable level of recycling management. The realization...

Inertial Labs, Inc.: Remote sensing emerged more than 150 years ago, as balloonists took pictures of the ground using the recently invented photo cameras in the 1840s. Perhaps the most memorable breakthrough in the field at the end of the 19th century was...

Senix Corporation, maker of ToughSonic® ultrasonic level and distance sensors, announces the continued expansion of Murray Irrigation’s historic irrigation automation project. Murray Irrigation, Australia’s largest privately owned...

Leuze electronic: Sensors must continuously and reliably detect a wide range of products and films on the conveyor belts of primary and secondary packaging machines for confectionery and baked goods (HFFS, FS, Thermoform, or VFFS). The packaging...

Balluff: The advantages of absolute measurement systems, such as immediate readiness when powered up, no loss of position after unplanned stops, and fast startup have long been known. With their BML BM 1 magnetic encoder system Balluff now offers...

BERTHOLD Technologies: Fluid catalytic cracking (FCC) is one of the most important conversion processes used in petroleum refineries, where the feedstock is heated with a catalyst. In the FCC, the catalyst circulates between reactor and...

BERTHOLD Technologies: Industrial glass melt furnaces are used in glass production to melt raw ingredients (batch) into a molten glass at temperatures exceeding 1200°C. Level control just after the outlet of the melt furnace is one of the main...

Honeywell is pleased to announce the addition of the MicroForce Sensor, FMA Series, to our extensive force sensing portfolio. The FMA Series are small form-factor (5mm x 5mm) piezoresistive-based force sensors with a digital output with multiple...