Sensor technologies / Measurement principles

B+B Thermo-Technik GmbH: The temperature measuring system TC100 can be used almost in all domains thanks its large measurement range of -200°C up to 1200°C. The convenience of this system, plug the USB connector and start the B+B ITS-View...

Autonnic: In addition to providing NMEA magnetic heading data, these rugged modules from Fluxgate world also provide both pitch and roll angle up to ±45º from horizontal with a resolution of 0.1º. Expected to have several areas of application...

Xsens: The MTi-G is an integrated GPS and MEMS Inertial Measurement Unit. It contains an internal ultra low-power AHRS processor running a real-time Xsens Kalman filter. The compact sensor provides accurate horizontal and vertical position,...

PT Ltd: The HCC is a stainless steel canister load cell, fully welded and sealed to IP68 sealing requirements. Rugged construction houses a very accurate measurement element which provide for better than .03% combined error. With a top capacity of...

BERTHOLD Technologies GmbH & Co. KG: Radiometric level gauges have proved themselves indispensable, especially in the chemical industry, due to their universal usage and reliability. The measurement is contact-free and requires no changes to...

Melexis: Ieper, Belgium – 12th of June 2007 - Melexis announces a new member in the Omnipolar™, Micropower Hall effect switch family. The MLX90248 employs CMOS technology to deliver a non-contact...

Kistler: In contrast to many other pressure sensors, it is possible to measure hot media up to 300 °C directly with the RH High-Pressure, High-Temperature Sensor. The unique construction with a special silicon measuring cell does not require any...

Melexis: One of the most prominent applications of Infra Red thermometers has been the fever measurement of humans. There are two main types of IR fever thermometers: the ear thermometers and forehead thermometers....

Balluff STM GmbH: The GLSK family features especially small external dimensions. All products have a ro-bust aluminum housing, which guarantees mechanical stability for an extremely precise optical acquisition system. Applications are in the...

PCB Piezotronics, Inc. (PCB®) has introduced a new series of dynamic pressure sensors, ideal for monitoring dynamic combustion pressure in diesel and natural gas powered engines...

PT Ltd: This LCBB bending beam load cell has a signal out put of 2mV/V of excitation. The LCBB is made in stainless steel and protected to a true IP rating of IP68 ie. (hermetically sealed) and with a safe over load of 150%. The linearity is only...

Balluff STM GmbH: Frame sensors used for counting metal parts are subject to extremely high mechanical stresses – falling metal parts can hit the sensor’s optical components or the connector and the sensor is often used in environments...

PT Ltd: The PT9000 is a medium to high capacity nickel plated tool steel, double ended shear beam load cell for tank, bin, general vessel, silo weighing and for weigh bridges from 120Klb to 150Klb (approx 9T to 68T). PT9000 is a fully sealed tool...

Melexis: Temperature is the most often measured physical parameter. However, remote non-contact temperature measurement has previously been complicated and expensive due to the complex signal treatment and calibration...