SICK AG: Inclination sensors from SICK’s TMS/TMM family take a non-contact measurement of the inclination angle of an object in relation to the earth's gravity. Thanks to the use of capacitive MEMS technology, inclination sensors are both...
Jewell Instruments: Introducing the 850 MEMS Tuff Tilt Series, the latest addition to Jewell Instruments’ electrolytic tiltmeter line for geophysical & geotechnical applications. This versatile, rugged, weatherproof tiltmeter is a...
Jewell Instruments: The JMA-100/200/300 accelerometer and JMI-100/200 inclinometer series, the latest additions to Jewell Instruments’ MEMS sensor line, are now available with 4-20mA output (JMA-L, JMI-L). This output option provides ease of...
Melexis, the global microelectronics company enabling future innovation through a philosophy of inspired engineering, continues to bring highly differentiated products to market through superior innovation, with the introduction of its MLX90819...
Xsens has launched BASE, an online technology platform with a community forum and a knowledge base on 3D motion tracking technology and products. On BASE.xsens.com, the knowledge base contains inside information about MEMS sensors, inertial...
Jewell Instruments: The JMA-100/200/300 accelerometer series is among the latest additions to Jewell Instruments’ MEMS sensor line and is now available in a single power input version (JMA-100/200/300-S) with a 0-5 VDC output signal. This...
Advanced Sensors Calibration (ASC), one of the world’s leading manufacturers of capacitive, piezoresistive and piezoelectric accelerometers, angular rate sensors and inertial measurement units has announced an upgrade to their Offshore (OS)...
Jewell Instruments: The JMI-100/200 inclinometer series is the latest addition to Jewell Instruments’ MEMS sensor line and is now available in a single power input version (JMI-100/200-S) with 0-5 VDC output signal. This input option...
Jewell Instruments: Introducing the JMI-100/200 inclinometer series, the latest addition to Jewell Instruments’ MEMS sensor line. This versatile, lightweight and robust sensor is a low-cost alternative to most traditional inclinometers. The...
Advanced Sensors Calibration (ASC), one of the world’s leading manufacturers of capacitive, piezoresistive and piezoelectric accelerometers, angular rate sensors (gyroscopes) and inertial measurement units (IMUs), has announced the...
Advanced Sensors Calibration (ASC) has announced the introduction of a new range of gyroscopes (gyros) for industrial applications. ASC 271 and 273 series MEMS gyros are intended for navigation and pointing applications in the industrial,...
Jewell Instruments: Introducing the JMA-100/200/300 accelerometer series, the latest addition to Jewell Instruments’ MEMS sensor line. This is a versatile, rugged and robust sensor that is a low-cost alternative to most traditional...
Advanced Sensors Calibration (ASC) has announced the introduction of medium-frequency (MF) accelerometers, a new family of MEMS-based capacitive accelerometers. The MF series is intended for test & measurement, condition monitoring and...
Jewell Instruments: Introducing the JMA-165 accelerometer series, the latest addition to Jewell Instruments’ RailStar and MEMS sensor lines. This is the industry’s first MEMS sensor to meet CENELEC/AREMA requirements for rail...
Colibrys: Patrick Gougeon, Colibrys CEO, presented at AIRTEC congress his vision about highâend MEMS sensors. Future and potential MEMS sensors will soon reach or even outperform the performance of current established technologies in the...
Mentor Graphics: Abstract: Most layout and verification tools are focused and optimized on IC design and are not suitable for irregular shapes needed for MEMS designs. MEMS designers need layout and verification tools that can handle challenges...
Mentor Graphics: Abstract: A big difference between MEMS layout and IC layout is the use of unique, irregular shapes. Unlike conventional CMOS IC design, MEMS design utilizes a much broader variety of geometries, due to its wide application in...
Mentor Graphics: Abstract: If you need to create your own models for an exotic device such as a TFT, solar cell, Thyristor, LDMOS, Image Sensor, or MEMS device, then Verilog-A gives you an efficient language for describing device behavior. Learn...
ETLG Inertial Aerosystems: The HMR3601 µPOINT® miniature precision compass module is a 3-axis digital compass solution with a unique gyro stabilization to reduce effects of magnetic disturbances. Three magneto-resistive sensors, three...
Jewell Instruments: A new output option is now available within Jewell Instruments’ MEMS inclinometer line with the addition of the AMV series. The AMV presents the advantage of ±5V and ±10V output options within a unique and...
Colibrys joins Memsense to highlight the value offered in the MX IMU. The MX IMU brings unprecedented value to the MEMS IMU market through the incorporation of the Colibrys MS9000 series accelerometers. Never before has such a high level of...
Colibrys, a subsidiary of Sagem (Safran), is releasing its new vibration sensor, the VS1000, which brings capacitive transducers to a new level of performance. The second generation of the Colibrys VS family, this new vibration sensor features an...
Xsens, the leading innovator in 3D motion tracking technology, today expanded its successful 4th generation MTi product portfolio by releasing a new series of complete, self-contained 3D IMU/VRU/AHRS motion tracking modules for high volume...
Sparton Corporation: Sparton Navigation and Exploration (NYSE: SPA) is introducing an enhanced MEMS based sensing Inertial Measurement Unit (IMU-10). Sparton’s IMU-10 has 10 degrees of freedom and provides industry leading accuracy. The...
Sparton Corporation presents AHRS-8, a highly advanced inertial sensor that enhances a best-in-class product line. The AHRS-8 is a MEMS-based (micro electro-mechanical systems) attitude heading reference system. Fully temperature compensated and...
Pewatron launches the new air quality gas sensors from SGX Sensortech. The MEMS based MiCS MOS sensors simplify the process of detecting gasses that impact air quality. Using innovative metal oxide semiconductor chemistry (MOS) supported by a...
Pewatron launched the new digital A4 series of gauge pressure sensors from Fujikura. The A series is compatible in footprint and pin configuration with the highly successful F and X series, but with higher total accuracy (+/-1.5%) and a wider...
Pewatron is pleased to announce the launch of the newest family of vibration sensors from Colibrys. The VS1000 has been developed using newest patented technologies. This sensor offers lowest non-linearity and noise in MEMS technology so far. It...
Pewatron is pleased to introduce the new low-cost inertial unit from Silicon Sensing. DMU10 provides three axes of angular rate and linear acceleration and two measurements of temperature. The output message includes message counter, built-in...
Silicon Designs, Inc., a leading designer and manufacturer of industrial grade MEMS variable capacitive accelerometer chips and modules, announced the North American market introduction of its new low-cost, integral inertial accelerometer family,...
