Baumer: As in many other applications, often it is not advisable or simply technically not feasible to install the encoder straight at the drive train to detect the speed of a conveyor belt. Any slip occurring at the belt may cause measuring...
Baumer: Based on the Sony ICX618 CCD sensor, the new TXG02 from Baumer is one of the fastest industrial digital cameras with VGA resolution on the market. The combination of a high frame rate of up to 140 fps and excellent image quality qualifies...
Pewatron: The LED power supplies of the HLG series by Mean Well Ltd. can be used in a rated performance range of 80~320 W. With input voltages of 90~305 VAC they provide direct current voltages of 12~54 V. They are fitted with an aluminium case...
Dytran Instruments, Inc. a leading manufacturer of piezoelectric and DC MEMS accelerometers, force and pressure transducers and associated electronics, has introduced the 3274A series of miniature, low profile, IEPE piezoelectric accelerometers...
Pilz: The automation system PSS 4000 from Pilz now includes the graphics Program Editor PASmulti. This can be used to create both standard and safety-related automation projects quickly and easily and to configure the control system PSSuniversal...
HBM: The piezoelectric force washers in the CFW series produced by the measurement technology specialist HBM have proven themselves in numerous applications since their introduction. The complete delivery with centering rings and plug protection...
HBM: The importance of accurate torque measurement in test bench applications, for example, keeps increasing. This means a corresponding increase in the significance of calibration for the torque transducers used in these test benches. An addition...
Leuze electronic: In spite of newer technologies, e.g. RFID, the use of barcodes and 2D codes for material flow applications has not fallen off. In addition to stationary readers, Leuze electronic produces hand-held scanners which are often used...
Leuze electronic: In addition to Data Matrix codes and the most important 1D barcodes, the new device software now enables the reading of Pharmacodes for the LSIS 400i Smart Camera from Leuze electronic. Pharmacodes are used in the packaging...
Leuze electronic has designed the new HRTR 25B-S reflection light scanner with focussed light spot optimally for the detection of glossy surfaces – and equipped the HRTR 25B-XL scanner with an extra large light spot for positioning tasks at the...
Leuze electronic: The functions of the 3B compact series from Leuze electronic have been extended to include the HRTR 3B-V and HRTL 3B reflection light scanners. In the 3B series from Leuze electronic, users will find the smallest reflection light...
Melexis, the pioneer in programmable linear Hall sensors launches its third product generation. This new family breaks with the conventional "single-in-line-package" (SIP) approach. SIP packages require more careful design consideration to avoid...
Melexis launches its 3rd generation of contactless MEMs infrared temperature sensors. The high accuracy of the newest member of the MLX90614 family makes it suitable for limitless applications in automotive, medical, industrial and consumer...
Melexis announces the launch of a new image sensor in the “Avocet” series, the MLX75412 extended HDR Image Sensor. The MLX75412 includes two on-chip functions: a high performing fully automatic Extended HDR and exposure control function named...
Micro-Epsilon: The new gapCONTROL laser scanner from Micro Epsilon has been developed specifically for non-contact gap measurement. The sensor is based on laser light section technology, though it makes use of a totally new evaluation procedure....
Sensortechnics’ new KMA series measures gage pressures of corrosive and aggressive gases and liquids in ranges from 500 mbar to 100 bar. These pressure sensors utilise internal digital signal conditioning to deliver calibrated and temperature...
Sensortechnics’ LBA differential pressure sensors are based on thermal mass flow measurement of air or gas through a micro-flow channel integrated within the silicon sensor chip. Due to the highly sensitive measuring principle the LBA sensor...
Waycon: Wood chip or wood pellet heating systems are modern CO2-neutral biomass heating systems for both private and large industrial plants. As the volume consumption is relatively large compared to liquid fuels, the knowledge of the current...
B+B Thermo-Technik GmbH: The infrared thermometer DM301 D is the easy entry into the multisensor installation - intelligent and secure for measurements from -40°C to 350°C. The measuring range is extended using the optional USB adapter and the...
SNT Sensortechnik AG: Wood chip or wood pellet heating systems are modern CO2-neutral biomass heating systems for both private and large industrial plants. As the volume consumption is relatively large compared to liquid fuels, the knowledge of...
Sensirion: Following the successful launch of the world’s smallest digital humidity and temperature sensor in 2010, the fully calibrated sensors of the SHT2x family have already won design slots in many applications. Now Sensirion has again...
SENSeOR will launch its new wireless SAW strain gages at SENSOR+TEST. Wireless and entirely passive (no battery, no energy harvesting), these 4 strain gages (SSE E015, SSE E016, SSE E017 and SSE E022) and their corresponding reference and...
SENSeOR’s SAW (Surface Acoustic Waves) sensors measure temperature, strain and pressure wirelessly and without any energy source, with radio-frequency interrogation similar to radar. For instance, placed inside engines or rotating industrial...
Optris GmbH introduces the new optris CSmicro series from which especially OEM customers will benefit according to the great product potential of these infrared thermometers. The improved price-performance-ratio supports the integration of the...
Micronas presents a new generation of Hall sensors for linear position measurement with their HAL 38xy family. The HAL 38xy family is firmly based on the 3D Hall technology which features two vertical and one horizontal Hall plate. Accompanying...
Metallux: Precise joysticks to finely adjust medical equipment are essential in the medical technology. Precision and robustness combined with a relatively small design are characteristics of Metallux joysticks. To fine adjust operation chairs via...
MAZeT GmbH presents the new Truecolormeter “colorStriker” from Mathai. “With this, MAZeT clearly and practically demonstrates exact color measurement with the JENCOLOR color sensors in use on a product,” explains Frank Krumbein, product...
MAZeT GmbH presents the latest color and spectrum sensor application-specific developments of the JENCOLOR product family. The presented innovations include the Truecolormeter "colorStriker" by Mathai, for which MAZeT supplies the complete...
MAZeT GmbH introduces a portable fluidic measuring station. This new device uncovers the smallest differences in color and transmission changes. “Developed in cooperation with the medical technology and biotechnology departments at the...
maxon motor: The canton of Obwalden's largest employer can look back on half a century of history: 50 years of maxon motor ag means 50 years of innovation, quality and continuity. It therefore stands to reason that maxon drives are used wherever...
