The system for gypsum boards dimensional measurement

RIFTEK - Turn-key solution on the base of 2D laser scanners and point triangulation sensors for continuous contactless measurement of gypsum boards geometrical parameters.

The system for gypsum boards dimensional measurement

Models: 3DGipsumB

Measured parameters:

• Full profile of any type shape edge with two adjacent surfaces 100 mm length each
• Edge Angle
• Edge Width
• Shoulder
• Taper Width
• Taper Depth
• Thickness Profile
• Board Width
• Lifting

Principle of Operation

As the gypsum boards move along the conveyor, they are continuously measured by the system's sensors. Information from sensors is processed on a central computer using the supplied software (hereinafter referred to as the software). If the values of the parameters are outside of tolerances, a corresponding warning is displayed on the screen of the central computer and the additional operator terminal.

Structure

The 3DGypsumB system contains three measuring stations located along the production line.

Designations:

• 1 – Measuring station #1.
• 2 – Measuring station #2.
• 3 – Measuring station #3.
• 4 – Additional operator terminal.
• 5 – Central computer.
• A – Mixer / molding.
• В – Slicing.
• Red lines – 24V power supply (generated by the system).
• Green lines – Ethernet network of the system.