![The system for gypsum boards dimensional measurement](https://sens2b-sensors.com/media/zoo/images/riftek_y22m01d19_250_54024820bd55a847b3f93f15b18f9b28.jpg)
The system for gypsum boards dimensional measurement
RIFTEK - Turn-key solution on the base of 2D laser scanners and point triangulation sensors for continuous contactless measurement of gypsum boards geometrical parameters.
The system for gypsum boards dimensional measurement
Models: 3DGipsumB
Measured parameters:
- Full profile of any type shape edge with two adjacent surfaces 100 mm length each
- Edge Angle
- Edge Width
- Shoulder
- Taper Width
- Taper Depth
- Thickness Profile
- Board Width
- Lifting
Principle of Operation
As the gypsum boards move along the conveyor, they are continuously measured by the system's sensors. Information from sensors is processed on a central computer using the supplied software (hereinafter referred to as the software). If the values of the parameters are outside of tolerances, a corresponding warning is displayed on the screen of the central computer and the additional operator terminal.
Structure
The 3DGypsumB system contains three measuring stations located along the production line.
Designations:
- 1 – Measuring station #1.
- 2 – Measuring station #2.
- 3 – Measuring station #3.
- 4 – Additional operator terminal.
- 5 – Central computer.
- A – Mixer / molding.
- В – Slicing.
- Red lines – 24V power supply (generated by the system).
- Green lines – Ethernet network of the system.